SEGGER J-Link EDU Emulato

  • RS-stocknr. 131-1323
  • Fabrikantnummer 8.08.90 J-Link EDU
  • Fabrikant SEGGER
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

J-Link EDU

J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.

Supported Processors

• ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features

• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 1MB/second
• Supports concurrent access to CPU by multiple applications
• GDB Server included: allows using J-Link remotely via TCP/IP
• Supports multiple target interfaces: JTAG, SWD
• Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Supports JTAG chains with multiple devices
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG 20-pin
• PC interface: USB 2.0
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Supported by all major IDEs
• Support via the SEGGER on-line forum: forum.segger.com

Target Adapters & Adapter Cables

131-1325 J-Link Target Power Supply Adapter • 131-1326 J-Link 10-pin Needle Adapter
131-1327 J-Link RX100/200/600 MCU Adapter
131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards

131-1335 J-Link ARM JTAG Isolator Board • 131-1336 J-Link ARM SWD Isolator Board
131-1337 J-Link USB Isolator Board

Note

J-Link EDU may only be used for non-commercial purposes.

Supplied with

USB cable, 20-pin ribbon cable

Specificaties
Kenmerk Waarde
Product Type Programmer
For Use With Flash microcontrollers
Kit Name J-Link EDU Emulato
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
151 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
51,58
(excl. BTW)
62,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 51,58
Related Products
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis ...
Description:
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis and decoding of the USB-PD (Power Delivery) and USB Type-C specifications packets on the Configuration Channel lines. The analyzer allows debugging of the USB Power Delivery communication. The CY4500 acts as a ...
J-Trace PRO for Cortex-M enables continuous streaming trace ...
Description:
J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce ...
Digilent’s Digital Discovery™ unit is both a logic ...
Description:
Digilent’s Digital Discovery™ unit is both a logic analyser and a pattern generating instrument specially designed to help optimize channels as well as both speed and portability. Allowing you to debug and visualize as well as simulate digital signals for ...
The SEGGER Microcontroller KG J-Trace is an isolator. ...
Description:
The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential ...