- RS-stocknr.:
- 131-1335
- Fabrikantnummer:
- 8.07.00 JTAG Isolator
- Fabrikant:
- SEGGER
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 275,88
(excl. BTW)
€ 333,81
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 275,88 |
- RS-stocknr.:
- 131-1335
- Fabrikantnummer:
- 8.07.00 JTAG Isolator
- Fabrikant:
- SEGGER
Wetgeving en compliance
Productomschrijving
J-Link ARM JTAG Isolator Board
The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET
Specificaties
Kenmerk | Waarde |
---|---|
Kit Name | J-Link ARM JTAG Isolator Board |
For Use With | J-Link Probes |
Product Type | Programmer |
- RS-stocknr.:
- 131-1335
- Fabrikantnummer:
- 8.07.00 JTAG Isolator
- Fabrikant:
- SEGGER