FTDI Chip USB NMC-2.5M USB to USB Null Modem Cable for use with PC To PC Networking Using USB Port, File Transfer

RS-stocknr.:: 537-420
Artikelnummer Distrelec:: 304-08-729
Fabrikantnummer:: USB NMC-2.5M
Fabrikant:: FTDI Chip

FTDI Chip USB NMC-2.5M USB to USB Null Modem Cable for use with PC To PC Networking Using USB Port, File Transfer

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 38,05

(excl. BTW)

€ 46,04

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 25 stuk(s) vanaf 05 januari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 38,05
10 - 49	€ 37,07
50 +	€ 36,14

*prijsindicatie

RS-stocknr.:: 537-420
Artikelnummer Distrelec:: 304-08-729
Fabrikantnummer:: USB NMC-2.5M
Fabrikant:: FTDI Chip

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	FTDI Chip
	Accessory Type	USB to USB Null Modem Cable
	Product Type	Cable
	For Use With	PC To PC Networking Using USB Port, File Transfer Between PCs
	Standards/Approvals	FCC and CE
	Distrelec Product Id	30408729

	Alles selecteren
	Merk FTDI Chip
	Accessory Type USB to USB Null Modem Cable
	Product Type Cable
	For Use With PC To PC Networking Using USB Port, File Transfer Between PCs
	Standards/Approvals FCC and CE
	Distrelec Product Id 30408729

FTDI Chip Null Modem Cable

The FTDI chip null modem cable is a modern replacement for the traditional serial null-modem cable. It allows a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface. This cable contains a small internal electronic circuit board, encapsulated into the USB connector at both ends of the cable. The electronic is based on the FTDI FT232R USB to serial UART IC and it handles all the USB signalling and protocols. This cable is a USB powered with 2.0 full speed compatible and 2.5m cable that supports data transfer rate up to 3Mbaud at TTL levels.

Features and Benefits

Based on back to back FTDI FT232RQ devices

Entire USB protocol handled by USB connector encapsulated electronics

Lower operating (20mA) and USB suspend mode current (70μA)

Operating temperature ranges between -40°C and 85° C

Support for USB suspend and resume

UHCI/OHCI/EHCI host controller compatible

USB 2.0 full speed compatible

USB Type A connector on both ends of cable

Applications

File transfer between PCs

Password protected file transfer between PCs

PC to PC networking using USB port

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007