SEGGER 8.06.12 J-Link Signal Smoothing Adapter Adapter for use with J-Link Debug Probe
- RS-stocknr.:
- 201-0718
- Fabrikantnummer:
- 8.06.12 J-Link Signal Smoothing Adapter
- Fabrikant:
- SEGGER
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 66,30
(excl. BTW)
€ 80,22
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 66,30 |
| 5 - 9 | € 62,98 |
| 10 + | € 61,00 |
*prijsindicatie
- RS-stocknr.:
- 201-0718
- Fabrikantnummer:
- 8.06.12 J-Link Signal Smoothing Adapter
- Fabrikant:
- SEGGER
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SEGGER | |
| Product Type | Development Kit Accessory | |
| Accessory Type | Adapter | |
| For Use With | J-Link Debug Probe | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SEGGER | ||
Product Type Development Kit Accessory | ||
Accessory Type Adapter | ||
For Use With J-Link Debug Probe | ||
Standards/Approvals No | ||
The SEGGER J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. Depending on target load capacitance, signals might be affected by overshoot and ringing.
User adjustable series resistors (default 47R) allow for damping critical signal rise/fall times leading to improved signal integrity
Gerelateerde Links
- SEGGER 8.19.28 for use with J-Link Debug Probe
- SEGGER 8.19.00 for use with J-Link Debug Probe
- SEGGER 8.06.01 J-Link RX Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.19 J-Link Xilinx Adapter Adapter
- SEGGER 8.06.18 J-Link Target Supply adapter Adapter for use with J-Link Probes
- SEGGER 8.08.01 J-Link ARM-14 Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.16 J-Link 6-pin Needle Adapter Adapter for use with J-Link
- SEGGER 8.06.13 J-Link Measurement+Patch Adapter Adapter