Georg Fischer ABS 10bar Diaphragm Valve, 29.514.510 1/2

  • RS-stocknr. 742-2775
  • Fabrikantnummer 29.514.510 1/2
  • Fabrikant Georg Fischer
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

Type 514 ABS Diaphragm Valves

Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.

Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content

Double flow rate compared to predecessor
One housing nut replaces four screws compared to predecessor
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Diaphragm Valves - PVC-U and ABS

10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.

Specificaties
Kenmerk Waarde
Attachment Type Socket
Pipe Diameter 1/2in
Body Material ABS
Connection 1/2 in Socket
Pressure Rating 10bar
Flow Factor Kv 125L/min
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +60 °C
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
102,92
(excl. BTW)
124,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 102,92
Related Products
WRAS approved water management system that complies with ...
Description:
WRAS approved water management system that complies with Bylaw 82 and 83ABS bodyPIR sensor 54μA (nominal current), 750mA (peak current for 50ms), 6Vdc (Voltage)Sensor range 3m – 4mField of view 138º (horizontal), 125º (vertical)Infrared sensor unit may be fitted directly ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
RS PRO S.28 quarter-turn manual ball valves feature ...
Description:
RS PRO S.28 quarter-turn manual ball valves feature a dual sealing system that allows the valve to be operated in either direction making installation easier. With no metal-to-metal moving parts and a chrome plated ball, the RS PRO manual valves ...
Ball valve type 546 PVC-U with solvent cement ...
Description:
Ball valve type 546 PVC-U with solvent cement sockets. Suitable for use in water treatment, ship building, food and beverage, CPI and microelectronics. Union type ends, easy installation/removalSolvent cement jointing, plain borePTFE Ball SealsOperating Temperature Range 0°C to 60°CErgonomic handle. ...