Valves & Taps

To control and isolate fluid flows, we supply a broad selection of valves and taps. Choose from butterfly valves, check valves, motorised valves, globe and ball valves, process solenoid valves and steam traps. Popular brands include the top worldwide, such as Nabic, SMC, Parker, Danfoss and Crouzet.

What are valves and taps?

A valve is an essential mechanical device used in plumbing and automation, which, similarly to switches, is responsible for modulating the flux of fluid passing through a pipe or a liquid container (such as a water bottle). The word tap most commonly refers to valves and fittings used in water control supplied by sinks and bathtubs, whether they are installed indoor or outdoor.

What kind of valves and taps are there?

The kind of valves available on the market can be distinguished according to their shape. The main types are:

  • Butterfly Valves: they are made of a disk which allows the fluid to flow freely in the pipe or to block it by swivelling sideways or upright respectively.
  • Ball Valves: their spherical shape makes it possible for them to block the fluid flow completely. By turning the handle, the valve moves by 90 degrees releasing the fluid flow.
  • Globe Valves: these are the main valves found in water taps, which modulate the amount of fluid that can flow into the pipe by screwing upwards as the handle is turned.
  • Needle Valves: the most common in automation due to the precision permitted by their slim design. Like the name suggest, the regulation is carried on via a long needle which slides into the pipe vertically.
  • Stop Cocks: also known as plug valve, in this case it blocks the fluid from flowing by moving aside when the handle is turned.

In addition to these, we offer a wide range of accessories to guarantee the best use of valves and taps: just to name some, we supply chemical tank accessories, solenoid coils and controllers, solenoid valve adapters and mounts, as well as water tap accessories.

Where can I find valves and taps?

Being their action valves and taps have several possible applications, but you will most likely find them in:

  • sinks
  • bathtubs
  • toilets
  • washing machines
  • car engines and carburettors

Related Products
For heating, sanitary and compressed air systems, pumps ...
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
A compact stainless steel non return disc check ...
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25. Connections are female screwedLow pressure dropSimple and compact designHorizontal or vertical installation.
These Float Valves are suitable for pressures up ...
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approvedSmall and quiet in operationMinimum working pressure 0.15 barFits most tanks and cisternsManufactured from 4-ton tensile strength engineering resin to high tolerancesAvailable for side and bottom ...
RS Brand Stainless Steel Screwed End Ball Valves ...
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceISO 5211 Mounting padThread type: ASME B1.20.1 (NPT) DIN2999 & ...