Hirschmann GDML 2P+E DIN 43650 A, Female Solenoid Valve Connector, No, 250 V Voltage

GDML series valve connectors are suitable for use in machine building and tooling, equipment manufacturing, designed to facilitate power and signal transmission for components such as magnetic valves, pressure transducers flow monitors and temperature sensors. These durable valve connectors are not affected by voltage surges or electro magnetic interference.

Electronic insert

These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment.

For automated control over fluid flow in your hydraulic system, choose this solenoid valve connector from Belden Hirschmann. It has a built-in varistor for protection against powerful surges in voltage. As it uses the screw termination method, you can achieve a secure electrical connection without the need for specialist tools. The unit's wide operating temperature range of -40°C to +90°C, makes it suitable for use in demanding environments.

• PA housing material for resistance to wear and chemicals
• Accommodates cables ranging in diameter from 4.5 to 10mm for versatility

• Fluid power motors
• Equipment manufacturing

A solenoid valve is an electrically operated control unit. It uses electromagnetic force to activate a plunger or armature that either allows or cuts off fluid flow in a hydraulic system.

IEC60529, DIN EN 175 301-803-A

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10