TRACOPOWER, TBLC DIN Rail Power Supply, 24V dc Output Voltage, 3.1A Output Current

  • RS-stocknr. 125-8552
  • Fabrikantnummer TBLC 75-124
  • Fabrikant TRACOPOWER
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

TBLC Series 6 W to 90 W

The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements (ECO Standard). They are intended for connecting as Class II devices, so the safety earth connection is not required. They are mountable in flat racks due to their small dimensions in depth.

Features and Benefits

• Low profile case
• Low output ripples and spikes
• Fully compliant to ECO-Standard
• UL 1310 Class II, NEC class 2 compliance and UL 508 listed
• Universal input range 85 V ac to 264 V ac
• Operating temperature range -25°C to 70°C
• Short circuit and overload protection
• Adjustable output voltage and DC-OK indicator

Product Application Information

Suitable for industrial and residential applications.

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 3.1 A
Power Rating 75W
Number of Outputs 1
Electrical Phase 1
Height 89.5mm
Width 59.5mm
Minimum Temperature -25°C
Series TBLC
Output Voltage Adjustment Range 24 → 28V
Standards Met ErP Compliant
Depth 59.5mm
Ripple And Noise 50mV Pk-Pk
Maximum Temperature +70°C
Special Features Adjustable Output Voltage, Compliant to New Standby Power & Efficiency Requirements, Low Output Ripples & Spikes
Mounting Type DIN Rail Mount
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
70,03
(excl. BTW)
84,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 70,03
Related Products
Economical and slim, the NDR range of power ...
Description:
Economical and slim, the NDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with ...
The single phase switched mode power supply (SMPS) ...
Description:
The single phase switched mode power supply (SMPS) from Block is highly efficient and has a stabilised and adjustable output voltage. Equipped with a wide input range of 85 V ac to 264 V ac. All models have push in ...
The low profile DRL series DIN Rail power ...
Description:
The low profile DRL series DIN Rail power supply provides a reliable solution for many industrial applications and building automation. With double insulation and safety Class II input, connection to earth is not required. The NEC Class 2 compliant output, ...
AC-DC Industrial 3-phase DIN rail power supply with ...
Description:
AC-DC Industrial 3-phase DIN rail power supply with PFC and Constant Current, Output 24VDc at 10A, DC OK. Three-Phase 340 550VAC wide range input (dual phase operation possible)63mm slim widthBuilt-in passive PFC function compliance to EN61000-3-2High efficiency 92% and low ...