RS PRO DIN Rail Power Supply, 24V dc Output Voltage, 5A Output Current

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS Pro DIN Rail Mount Power Supplies

From RS Pro a range of high-performance power supplies in a compact 35mm DIN rail mounting package for convenience and space saving. These DIN rail mount power supplies are available with a range of power ratings from 15 W to 240 W and accept single-phase AC input for conversion into a single DC output of either 12V, 15V, 24V or 48V DC.

What is a DIN Rail Power Supply?

A DIN rail mounting power supply, also known as an electric power converter is a convenient means of supplying power to DC operated equipment. The power supply is mounted on a 35 mm DIN rail which is a standard sized metal strip on to which electronic devices such as circuit breakers, relays, motor starters and PLCs can be mounted enabling the assembly of very compact systems.

How Does a DIN Rail Power Supply Work?

Some electrical appliances require power but lack the internal components to derive the required voltage and power from the AC (alternating current) mains power. The DIN rail power supply solves this problem by converting the AC mains input voltage into a usable DC (Direct Current) output voltage. The power supply unit is connected to an incoming AC mains power source and the device requiring power is connected to the power supply with a suitable power cable and connector. The power supply unit then converts the incoming AC current into the correct single output voltage, current and frequency which is then supplied to the device through the cable.

Features and Benefits

These DIN rail power supplies have the following features and benefits:

• Compact 35mm DIN rail mounting package
• Single phase input voltage
• Universal AC input voltage range from 90 to 264 Vac
• High performance and reliability
• 100% full load burn-in test – a burn-in test is a form of stress testing to detect early failures.
• Cooling by Free Air Convection – the heat given off by this power supply is cooled off by the free air circulating around it as opposed to being fan cooled
• LED indicator for DC power on
• LED indicator for DC low
• Short circuit, over voltage, over current and over temperature protection

Where Would a DIN Rail Power Supply be used?

A DIN rail power supply is a convenient and space saving solution for providing power to DC operated appliances used in process control, factory automation, traffic and transportation systems and other industrial applications. Devices that can be powered by these DIN rail power supplies include the following:

• Sensors
• Transmitters/receivers
• Analyzers
• PLCs
• Motors
• Actuators
• Solenoids
• Relays

Switch Mode - RS Pro

Specificaties
Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 230V ac
Output Voltage 24 V dc
Output Current 5 A
Power Rating 120W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 130mm
Width 40mm
Ripple And Noise 120mV
Minimum Temperature -25°C
Special Features Compact Size, Cooling by Free Air Convection, LED Indicator for DC Low, LED Indicator for DC Power On, 3-Years Warranty, 100% Full Load Burn-In Test
Load Regulation 3%
Output Voltage Adjustment Range 23 → 28V
Standards Met CB, CE, CUL, CULus Recognised, FCC, UL
MTBF 200kh
Mounting Type DIN Rail, Vertical Mount
Maximum Temperature +70°C
Depth 125mm
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
38,33
(excl. BTW)
46,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 38,33
Related Products
Ultra compact and lightweightFits onto 35mm DIN railRapid ...
Description:
Ultra compact and lightweightFits onto 35mm DIN railRapid connection-screw terminalsEMC immunity to EN50082-2EMI to EN55011Class B, FCC level BAdjustable output voltageConstant current regulation, suitable for battery charging applicationsOverload protectionVery low ripple and noiseLED output indicatorPower factor ...
Compact and light weight (plastic case)Fits onto 35mm ...
Description:
Compact and light weight (plastic case)Fits onto 35mm DIN-rail EMI complies with EN55022-B, FCC-BAdjustable output voltageParallel operations listedPower 'good' signalOutput LED indicatorOverload/over-voltage protection.
230-400Vac input voltageInput voltage adjustment taps:±15VSafety isolating transformer ...
Description:
230-400Vac input voltageInput voltage adjustment taps:±15VSafety isolating transformer with electrostatic screen4510V input/output isolationIntegral output protection fuse providedTwin output terminals for ease of connectionGreen output LEDEasy to read - laser engraved label with international conformity ...
True Industrial Grade designRugged metal case for harsh ...
Description:
True Industrial Grade designRugged metal case for harsh industrial environmentsFits on to 35mm DIN RailAdjustable Output VoltageIndefinite Short Circuit, Overvoltage and Overtemperature protectionPower Good signalRemote On/OffShock and vibration proof.