RS PRO DIN Rail Power Supply - 230V ac Input Voltage, 48V dc Output Voltage, 2.5A Output Current, 120W

Wetgeving en compliance
Land van herkomst: CN

RS Pro DIN Rail Mount Power Supplies

From RS Pro a range of high-performance power supplies in a compact 35mm DIN rail mounting package for convenience and space saving. These DIN rail mount power supplies are available with a range of power ratings from 15 W to 240 W and accept single-phase AC input for conversion into a single DC output of either 12V, 15V, 24V or 48V DC.

What is a DIN Rail Power Supply?

A DIN rail mounting power supply, also known as an electric power converter is a convenient means of supplying power to DC operated equipment. The power supply is mounted on a 35 mm DIN rail which is a standard sized metal strip on to which electronic devices such as circuit breakers, relays, motor starters and PLCs can be mounted enabling the assembly of very compact systems.

How Does a DIN Rail Power Supply Work?

Some electrical appliances require power but lack the internal components to derive the required voltage and power from the AC (alternating current) mains power. The DIN rail power supply solves this problem by converting the AC mains input voltage into a usable DC (Direct Current) output voltage. The power supply unit is connected to an incoming AC mains power source and the device requiring power is connected to the power supply with a suitable power cable and connector. The power supply unit then converts the incoming AC current into the correct single output voltage, current and frequency which is then supplied to the device through the cable.

Features and Benefits

These DIN rail power supplies have the following features and benefits:

• Compact 35mm DIN rail mounting package
• Single phase input voltage
• Universal AC input voltage range from 90 to 264 Vac
• High performance and reliability
• 100% full load burn-in test – a burn-in test is a form of stress testing to detect early failures.
• Cooling by Free Air Convection – the heat given off by this power supply is cooled off by the free air circulating around it as opposed to being fan cooled
• LED indicator for DC power on
• LED indicator for DC low
• Short circuit, over voltage, over current and over temperature protection

Where Would a DIN Rail Power Supply be used?

A DIN rail power supply is a convenient and space saving solution for providing power to DC operated appliances used in process control, factory automation, traffic and transportation systems and other industrial applications. Devices that can be powered by these DIN rail power supplies include the following:

• Sensors
• Transmitters/receivers
• Analyzers
• PLCs
• Motors
• Actuators
• Solenoids
• Relays

Switch Mode - RS Pro

Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 230V ac
Output Voltage 48 V dc
Output Current 2.5 A
Power Rating 120W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 130mm
Width 40mm
Maximum Temperature +70°C
MTBF 200kh
Output Voltage Adjustment Range 47 → 55V
Special Features Compact Size, Cooling by Free Air Convection, LED Indicator for DC Low, LED Indicator for DC Power On, 3-Years Warranty, 100% Full Load Burn-In Test
Load Regulation 3%
Mounting Type DIN Rail, Vertical Mount
Depth 125mm
Minimum Temperature -25°C
Ripple And Noise 240mV
Standards Met CB, CE, CUL, CULus Recognised, FCC, UL
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
36 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 39,48
Related Products
The GSM-B is complying with international medical safety ...
The GSM-B is complying with international medical safety regulations, this plug in power supply also possess a low leakage current ˂50 μA and low no load power consumption ˂0.1W, which can fulfil the demands of “patient contact” medical applications. The ...
Filtered, rectified power supplies are built using a ...
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used ...
DC-DC Ultra slim Industrial DIN rail converter, Input ...
DC-DC Ultra slim Industrial DIN rail converter, Input 9-36Vdc, Single Output 12Vdc at 2.5A. Width only 35mm (2SU) 4:1 ultra wide input range-40∼+85°C wide working temperature No minimum load requiredDC output adjustable ( 10%)Cooling by free air convectionCan be installed ...
3-phase units SL10 & SL20 offer a choice ...
3-phase units SL10 & SL20 offer a choice of overload response. In FUSE mode, in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output ...