ABB, CP-C.1 DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

  • RS-stocknr. 176-9041
  • Fabrikantnummer CP-C.1 24/10.0
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The CP-C.1 24/10.0-C is a power supply from the CP-C.1 range with coated PCBA. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 % and allows parallel operation to increase capacity and to enable redundancy. Redundancy unit and buffer modules are available as accessories.

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 1
Type Switched Mode Power Supply
Height 129.4mm
Width 60mm
Ripple And Noise 120mV Pk-Pk
Series CP-C.1
Mounting Type DIN Rail Mount
Standards Met CAN/CSA C22.2 No.107.1, EN 50581, IEC/EN 60079-0, IEC/EN 60079-15, IEC/EN 60079-7, IEC/EN 60950-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61204, UL 508
Output Voltage Adjustment Range 22.5 to 28.5V
Maximum Temperature +85°C
Minimum Temperature -40°C
Depth 136mm
Hazardous Area Certification ATEX
Efficiency 94.0%
12 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
327,00
(excl. BTW)
395,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 327,00
Related Products
input 180-264VACSafety extra low voltage (SELV)Isolation class ICooling ...
Description:
input 180-264VACSafety extra low voltage (SELV)Isolation class ICooling by free air convectionLED indicator for normal operation, bus reset and bus overloadInstalled on DIN rail TS-35/7.5 or 15100% full load burn-in test3 year warranty.
High quality metal cased switch mode power suppliesDesigned ...
Description:
High quality metal cased switch mode power suppliesDesigned for symmetrical 35mm DIN-railIdeal for process control & machine tool applicationsEMC immunity to EN50082-2EMI to EN55011 Class B, FCC level BLow profileAdjustable output voltageFully regulated output, short circuit protection/current limitOver-voltage ...
Ultra compact and lightweightFits onto 35mm DIN railRapid ...
Description:
Ultra compact and lightweightFits onto 35mm DIN railRapid connection-screw terminalsEMC immunity to EN50082-2EMI to EN55011Class B, FCC level BAdjustable output voltageConstant current regulation, suitable for battery charging applicationsOverload protectionVery low ripple and noiseLED output indicatorPower factor ...
Miniature size and lightweightQuick and easy mounting onto ...
Description:
Miniature size and lightweightQuick and easy mounting onto 35mm DIN-railSpring clamp terminals72W and 100W meet PFC standard EN61000-3-2Adjustable output voltageOverload and short circuit protectedOutput LED indicatorSuitable for use in harsh environment.