Phoenix Contact STEP-PS/1AC/ 5DC/6.5 Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 5V dc dc

The single-phase STEP POWER generation of compact power supply units from Phoenix Contact have a high degree of efficiency and the low standby losses make for high power efficiency. The PSU’s are available with 24 V DC output voltage in various performance classes and overall widths as well as special voltages 5, 12, 15, and 48 V DC.

These PSU's (Power supply units) have been designed more specifically for building automation, however, are not limited to explicitly that use. Low idling and maximum efficiency help to achieve higher energy efficiency. Not to mention, these power supplies have a DIN rail notch took out of the housing to allow you effortless install, on a DIN rail. DIN Rail power supply's are great for cable management, having everything in a single cabinet for consistent maintenance and ease of use.

• Easy mounting by snapping on the DIN rail or screwing onto a level surface
• Maximum energy efficiency through small losses
• Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve
• Fast commissioning with LED function monitoring
• High operational safety by long power failure under full load
• Worldwide use by wide-range intake and international approval package
• Wide temperature range from -25 ° C to +70 ° C
• Parallel switched to increase performance and redundancy
• Outdoor installation possible
• Energy savings thanks to maximum energy efficiency and incredibly low idling losses

The design of the PSUs makes them suitable for installation distributors and flat control panels. More specifically, these STEP POWER PSU's have been designed to cater for building automation applications.

DIN rail power supplies typically feature an easy install. With the ability to mount it onto a compatible DIN rail, all you usually have to do is slide it onto one. These STEP DIN rail power supply's support NS 35 (EN 60715) rails. Once you've slid your power supply onto your rail, it is then a case of connecting your cables into the relevant inputs and outputs. Wires must be stripped 6.5mm before inserting into the terminal blocks. The terminal blocks are an effortless screw connection, making your install simple.

Effectively, a DIN rail power supply is a power supply, that is designed to be put on a DIN rail. These power supplies cater to the industrial world, rather than consumer electronics. They feature different connection methods such as terminal block connections rather than your typical 3-pin socket power. DIN Rail PSU's are designed to sit inside cabinets and work hand-in-hand with providing higher efficiency for industrial applications.

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved

This DIN rail power supply by Phoenix Contact, with a compact design and efficient operation, is ideal for single-phase power supply applications. With an output voltage of 5V DC and efficiency over 80%, this industrial power supply ensures reliable performance for various automation and electronic systems.

• Efficient single-phase power supply suitable for DIN rail mounting
• Output voltage of 5V DC and maximum output current of 6.5A
• High MTBF of more than 500,000 hours for reliable power distribution
• Compact design allows for flexible mounting options
• Energy savings due to maximum efficiency and low idling losses
• Flexible input voltage range of 85V AC to 264V AC for versatile compatibility

• Ideal for building automation systems
• Suitable for distribution boards in industrial environments
• Used for powering electronic equipment in control cabinets
• Can be used for applications requiring reliable and efficient power supply

It is designed specifically for building automation, providing reliable power distribution.

Yes, it is suitable for use in control cabinets for powering various electronic devices.

Yes, it is designed for use with industrial distribution boards for seamless power distribution.