PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 20 A Output DC 480 W

RS-stocknr.:: 670-0677
Artikelnummer Distrelec:: 169-96-533
Fabrikantnummer:: QS20.241
Fabrikant:: PULS

PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 20 A Output DC 480 W

Subtotaal (1 eenheid)*

€ 383,56

(excl. BTW)

€ 464,11

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

67 stuk(s) klaar voor verzending
56 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 34 stuk(s) vanaf 24 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 383,56

*prijsindicatie

RS-stocknr.:: 670-0677
Artikelnummer Distrelec:: 169-96-533
Fabrikantnummer:: QS20.241
Fabrikant:: PULS

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	PULS
	Product Type	DIN Rail Power Supply
	Series	DIMENSION
	Sub Type	Switched Mode
	Maximum Output Voltage	28V dc
	Electrical Phase	1
	Number of Outputs	1
	Input Voltage Type	AC
	Power	480W
	Output Current	20A
	IP Rating	IP20
	Output Voltage Type	DC
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Hazardous Area Certification	No
	Depth	127mm
	Width	82mm
	Height	124mm
	Standards/Approvals	No
	Maximum Input Voltage	240V ac
	Minimum Input Voltage	100V ac

	Alles selecteren
	Merk PULS
	Product Type DIN Rail Power Supply
	Series DIMENSION
	Sub Type Switched Mode
	Maximum Output Voltage 28V dc
	Electrical Phase 1
	Number of Outputs 1
	Input Voltage Type AC
	Power 480W
	Output Current 20A
	IP Rating IP20
	Output Voltage Type DC
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Hazardous Area Certification No
	Depth 127mm
	Width 82mm
	Height 124mm
	Standards/Approvals No
	Maximum Input Voltage 240V ac
	Minimum Input Voltage 100V ac

qs20.241Datasheet

Land van herkomst:: CZ

PULS DIN Rail Power Supply

The PULS DIMENSION Q series single-phase DIN-rail switch-mode power supply has an adjustable output voltage ranging between 24VDC and 28VDC with 20A current. This cost-optimised power supply is specifically designed with uncompromised quality and reliability for high-performance. This unit is equipped with an input voltage ranging between 100VAC and 240VAC. This power supplies diagnostic is easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED.

Features and Benefits

Light and compact

Easy to install

Quick-connect spring-clamp terminals

Efficiency is up to 93.9%

Power rating is 480W

Ripple factor and noise is 100mVpp

Active power factor correction (PFC)

Negligible low inrush current surge

DC-OK signal with relay

50% power reserves available up to 4s

Operation temperature ranges between -25°C and 70°C

Applications

Industrial control

Automation

Communication and instrumentation equipment

Certifications

IEC

UL approved

SELV