Siemens, SITOP PSU100S DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 20A Output Current

  • RS-stocknr. 756-3977
  • Fabrikantnummer 6EP1336-2BA10
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AT
Productomschrijving

SITOP Smart Power Supply Unit

The 1 and 3 phase SITOP smart is the universal and powerful standard power supply for machinery and plant engineering. Despite their compact design, they offer an excellent overload response. Thanks to a power boost of 150%, loads with high power consumption can be connected without any problems. The permanent overload capability of 120% offers power reserves in-case of expansions. The high degree of efficiency results in low energy consumption and minimal heat generation inside the control cabinet.
To increase the 24 V availability, the SITOP smart power supply can be combined with buffer, DC UPS, redundancy and selectivity modules.

Features and Benefits

• Compact design • Extra power with 1.5 times the rated current for brief functional overload
• Permanent overload capability with 1.2 times the rated current up to 45°C (24 V versions)
• High degree of efficiency up to 91.5%
• Adjustable output voltage for compensating voltage drops
• Signalling contact for easy integration in the plant monitoring system
• Wide temperature range from -25°C or -10°C to 70°C

Product Application Information

SITOP power supplies can be combined with buffer modules, uninterrupted power supplies, redundancy modules and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

cULus
cCSAus
ATEX
IECEx
GL

SITOP PSU100S 20 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/20 A

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 132V ac
Output Voltage 24 V dc
Output Current 20 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 145mm
Width 115mm
MTBF 1778916h
Mounting Type DIN Rail Mount
Series SITOP PSU100S
Output Voltage Adjustment Range 24 → 28V
Load Regulation 1%
Minimum Temperature 0°C
Hazardous Area Certification IECEx
Depth 150mm
Ripple And Noise 150mV Pk-Pk
Maximum Temperature +70°C
53 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
199,00
(excl. BTW)
240,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 199,00
Related Products
The RS Pro Range of 120 watt AC/DC ...
Description:
The RS Pro Range of 120 watt AC/DC switch mode power supplies provide 120 watts of continuous output power in a high quality compact enclosure suitable for many general power applications.
The S8VK-S series of single phase switch mode ...
Description:
The S8VK-S series of single phase switch mode power supplies from Omron are the perfect fit for small control panels. With easy wiring push in plus technology, wiring time can be greatly reduced by up to 60%. Simply push in ...
The S8FS-G series of Switch mode DIN Rail ...
Description:
The S8FS-G series of Switch mode DIN Rail power supplies provide you with excellent standard performance and reliability. They do not require transformers for control circuits plus have in built IEC 61558-2-16 compliant transformers so no need for a transformer ...
Covered type, with fan, 100 to 240 VAC, ...
Description:
Covered type, with fan, 100 to 240 VAC, Power rating 300 W, Output: 24 V, Terminal blocks (Screw terminal), Remote control function, Parallel operation, Harmonic current emissions. Limits for harmonic current emissions Applicable to input free voltage: 100 to 240 ...