Phoenix Contact 2715979 DIKD 1.5 Series DIN Rail Terminal Block Grey, 0.2mm², 4 mm², 3-Level, Screw

RS-stocknr.:: 648-6961
Artikelnummer Distrelec:: 148-28-020
Fabrikantnummer:: 2715979
Fabrikant:: Phoenix Contact

Phoenix Contact 2715979 DIKD 1.5 Series DIN Rail Terminal Block Grey, 0.2mm², 4 mm², 3-Level, Screw

Subtotaal (1 eenheid)*

€ 5,17

(excl. BTW)

€ 6,26

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 74 stuk(s) vanaf 20 april 2026
Plus verzending 200 stuk(s) vanaf 27 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 5,17

*prijsindicatie

RS-stocknr.:: 648-6961
Artikelnummer Distrelec:: 148-28-020
Fabrikantnummer:: 2715979
Fabrikant:: Phoenix Contact

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Phoenix Contact
	Product Type	DIN Rail Terminal Block
	Colour	Grey
	Sub Type	Sensor/Actuator
	Number of Levels	3
	Voltage	250V
	Series	DIKD 1.5
	Cable CSA	0.2, 4mm²
	Minimum Wire Size AWG	24AWG
	Fused	No
	Maximum Wire Size AWG	12AWG
	Terminal Block Current	24A
	Termination Type	Screw
	Minimum Operating Temperature	-60°C
	Maximum Operating Temperature	105°C
	Hazardous Area Certification	NO
	Standards/Approvals	CSA

	Alles selecteren
	Merk Phoenix Contact
	Product Type DIN Rail Terminal Block
	Colour Grey
	Sub Type Sensor/Actuator
	Number of Levels 3
	Voltage 250V
	Series DIKD 1.5
	Cable CSA 0.2, 4mm²
	Minimum Wire Size AWG 24AWG
	Fused No
	Maximum Wire Size AWG 12AWG
	Terminal Block Current 24A
	Termination Type Screw
	Minimum Operating Temperature -60°C
	Maximum Operating Temperature 105°C
	Hazardous Area Certification NO
	Standards/Approvals CSA

Land van herkomst:: PL

Phoenix Contact Power Terminal Block, 24A, 250V AC/DC - DIKD 1.5 - 2715979

Protect sensors or actuators from overcurrent and surges with this terminal block from Phoenix Contact. It allows you to connect 3-wire sensors and actuators with one component. When used with jumpers, the unit handles both the distribution of power and common signals to reduce the complexity of your wiring.

Durable polyamide housing offers impact resistance as well as electrical insulation to protect operators from electric shocks. The screw connection method ensures a strong hold that won't shake loose, even in the event of heavy vibrations. With space-saving dimensions of 72.5 (length) x 6.2 (width) x 62mm (height), the unit allows for improved packing efficiency in crowded control cabinets.

This terminal block is suitable for general power applications, such as lighting control systems. It's also a good choice for telecommunication and process control applications.

• Accepts wires ranging in diameter from 24 to 12AWG (American Wire Gauge) for versatility

• Meets DIN EN 60216-1 (German Institute for Standardisation/European Norm) thermal endurance standards for use in extreme temperatures

• Rated surge voltage of 4kV for protection against power surges

Phoenix Contact Multi-level terminal Blocks

A range of multi-level terminal blocks from Phoenix Contact for the rational wiring of modern machine controls.

The terminal blocks are designed for mounting on flat top hat rail to DIN EN 50 022.

Features and Benefits

• All three wires in parallel on one terminal with the three-level initiator terminal

• Through-terminal for signal flow in top level

• Single-ended terminal locations for positive and negative connections in middle and lower level

• PE connection in lower level with the three-level actuator terminal

Approvals

UL, CUL, CSA