Catu DT-300 Earth Tester Aurix
- RS-stocknr.:
- 437-803
- Fabrikantnummer:
- DT300
- Fabrikant:
- Catu
Subtotaal (1 eenheid)*
€ 455,13
(excl. BTW)
€ 550,71
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 11 stuk(s) vanaf 01 mei 2026
- Plus verzending 5 stuk(s) vanaf 15 mei 2026
- Plus verzending 1 stuk(s) vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 455,13 |
*prijsindicatie
- RS-stocknr.:
- 437-803
- Fabrikantnummer:
- DT300
- Fabrikant:
- Catu
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Catu | |
| Product Type | Earth Tester | |
| Accuracy | ±3% + 1 Digit | |
| Measurement Type | Earth Resistance | |
| Display Type | LCD | |
| Power Source | Mains | |
| Weight | 340g | |
| Height | 51mm | |
| Includes | Extension Reel, Probe | |
| Length | 210mm | |
| Standards/Approvals | ENCE | |
| Maximum Operating Temperature | 45°C | |
| Width | 71mm | |
| Minimum Operating Temperature | -15°C | |
| Safety Category Level | Aurix | |
| Model Number | DT-300 | |
| Alles selecteren | ||
|---|---|---|
Merk Catu | ||
Product Type Earth Tester | ||
Accuracy ±3% + 1 Digit | ||
Measurement Type Earth Resistance | ||
Display Type LCD | ||
Power Source Mains | ||
Weight 340g | ||
Height 51mm | ||
Includes Extension Reel, Probe | ||
Length 210mm | ||
Standards/Approvals ENCE | ||
Maximum Operating Temperature 45°C | ||
Width 71mm | ||
Minimum Operating Temperature -15°C | ||
Safety Category Level Aurix | ||
Model Number DT-300 | ||
- Land van herkomst:
- FR
Catu Earth & Ground Resistance Tester
The Catu earth and ground resistance tester measure a 1.999kΩ absolute maximum resistance and is having a CAT III safety category. This tester is used to ensure proper operation of the earthing system. It emits a sound signal for continuity checks and directly displays the value on the LED screen. It is also used to measure the electrical characteristics of a system. The measurement of the earth resistance, performed by this device, is based on the measurement principle called "fault loop". The measurement is carried out with an accuracy of (+/-3% +1 digit) on pure resistance, range of 0-200 Ω at 23 °C +/-5°C.
Features and Benefits
Available with a touch point on extension cord of 7m and instructions for use, without a case
Displays the presence of Voltage and the phase position
Measures the earth loop (fault loop) without tripping the circuit breakers: <15 mA
Non-slip coating for a better grip
Once connected to a properly connected installation, the earth value is displayed instantly on the top of the 4-digit LCD display that can indicate earth resistance values ranging between 0 and 100Ω in blue colour digits (at the 100 Ω threshold recommended by NF C 15-100) and between 101Ω and 1999Ω in red colour digits
Operating temperature ranges between -150C and 450C
Total autonomy (without battery)
Two-way use: 2P + T socket or LV switchboard with cord
Applications
• Measurement of earth resistance.
• Highlight phase position and check the presence of earthing connection.
• Controls continuity of metal masses (buzzer).
Features
• Quick reading of conformity due to bicolor LCD Display (blue = OK/ red= no conformity).
• "Default loop" principle using for earth measurement in TT schema.
• Earth measurement with 3 1/2 digits LCD display (from 0 to 1999 Ω).
• Accuracy: ± (3% + 1 digit) for pure resistance, range 0 to 200 Ω at 23°C ± 5°C.
• Show presence of dangerous voltage (400 V - connection between phases).
• Full autonomy: no battery, power supply by plugging on 2P+T outlet.
Composition
• 1 device
• 1 roller with 7 m length cord M-921647 (not included in version DT-300-SE).
• 1 user manual
Optional Accessories
• Cord for intervention on LV tables M-952271.
Certifications
EN 61557-4;IEC 61010-1;IK06 rated;IP40 rated;NF C15-100