Festo ELGS, 8083427 Electrical Linear Actuator, 0.18m/s, 0.18 mm
- RS-stocknr.:
- 203-9793
- Artikelnummer Distrelec:
- 301-86-883
- Fabrikantnummer:
- ELGS-BS-KF-32-400-8P-ST-M-H1-PLK-AA
- Fabrikant:
- Festo
Subtotaal (1 eenheid)*
€ 1.254,07
(excl. BTW)
€ 1.517,42
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 22 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.254,07 |
*prijsindicatie
- RS-stocknr.:
- 203-9793
- Artikelnummer Distrelec:
- 301-86-883
- Fabrikantnummer:
- ELGS-BS-KF-32-400-8P-ST-M-H1-PLK-AA
- Fabrikant:
- Festo
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Festo | |
| Product Type | Electrical Linear Actuator | |
| Stroke Length | 0.18mm | |
| Maximum Speed | 0.18m/s | |
| Series | ELGS | |
| Motor Technology | Stepper Motor | |
| Duty Cycle | 100% | |
| IP Rating | IP40 | |
| Guide Type | Ball Bearing | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS | |
| Model Number | 8083427 | |
| Alles selecteren | ||
|---|---|---|
Merk Festo | ||
Product Type Electrical Linear Actuator | ||
Stroke Length 0.18mm | ||
Maximum Speed 0.18m/s | ||
Series ELGS | ||
Motor Technology Stepper Motor | ||
Duty Cycle 100% | ||
IP Rating IP40 | ||
Guide Type Ball Bearing | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS | ||
Model Number 8083427 | ||
- Land van herkomst:
- DE
Festo ELGS Series Electrical Linear Actuator, 100% Duty Cycle, 0.18mm Stroke Length - ELGS-BS-KF-32-400-8P-ST-M-H1-PLK-AA, Numeric Part Number: 8083427
This electrical linear actuator converts rotary stepper motion into precise linear travel for automated motion control in industrial contexts. It is built to operate continuously and is suited to installations requiring compact, motor-driven linear positioning. The device uses a guided bearing system and conforms to environmental protection and material restriction standards relevant to electronic assemblies.
Features & Benefits
• 100% duty cycle enables continuous operation without downtime
• Ball bearing guide reduces lateral play for high-precision positioning
• Stepper motor technology delivers controllable incremental movement
• IP40 enclosure rating permits use in protected indoor environments
• Maximum speed of 0.18 m/s supports moderate-velocity transfer tasks
• Rated for operation up to 50°C for higher-temperature installations
• Ball bearing guide reduces lateral play for high-precision positioning
• Stepper motor technology delivers controllable incremental movement
• IP40 enclosure rating permits use in protected indoor environments
• Maximum speed of 0.18 m/s supports moderate-velocity transfer tasks
• Rated for operation up to 50°C for higher-temperature installations
**Applications**
• Suitable for pick-and-place operations in assembly lines
• Ideal for linear indexing in test and measurement rigs
• Used for precise dosing motion in lab automation equipment
• Can be used for Camera or sensor positioning in inspection systems
• Ideal for linear indexing in test and measurement rigs
• Used for precise dosing motion in lab automation equipment
• Can be used for Camera or sensor positioning in inspection systems
What stroke range can I expect for fine adjustments?
The unit provides a nominal stroke of 0.18 mm, making it appropriate for very small, high-resolution adjustments where minimal travel is required.
How does the actuator meet environmental and materials requirements?
It complies with RoHS directives, indicating restricted use of specific hazardous substances in its construction.
What guidance system maintains alignment under load?
A ball-bearing guidance arrangement controls side loads and preserves positional accuracy during reciprocation.
Can it be used in continuous-production machines?
Yes, its design supports continuous-duty operation, allowing integration into machines that run without frequent rest cycles.
What motor characteristics affect control implementation?
The integrated stepper motor technology enables open-loop incremental control and precise step-based positioning for motion-control systems.