Festo ELGC, 8062794 Electrical Linear Actuator, 1500mm/s, 1800 mm
- RS-stocknr.:
- 281-1086
- Fabrikantnummer:
- ELGC-TB-KF-80-1800
- Fabrikant:
- Festo
Subtotaal (1 eenheid)*
€ 922,36
(excl. BTW)
€ 1.116,06
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 22 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 922,36 |
*prijsindicatie
- RS-stocknr.:
- 281-1086
- Fabrikantnummer:
- ELGC-TB-KF-80-1800
- Fabrikant:
- Festo
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Festo | |
| Product Type | Electrical Linear Actuator | |
| Stroke Length | 1800mm | |
| Maximum Speed | 1500mm/s | |
| Series | ELGC | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Festo | ||
Product Type Electrical Linear Actuator | ||
Stroke Length 1800mm | ||
Maximum Speed 1500mm/s | ||
Series ELGC | ||
Standards/Approvals No | ||
- Land van herkomst:
- CN
Festo ELGC Series Electrical Linear Actuator, 1800mm Stroke Length, 100% Duty Cycle - ELGC-TB-KF-80-1800, Numeric Part Number: 8062794
This electrical linear actuator converts rotary drive into linear motion for automated positioning tasks in industrial environments. It is designed for continuous-operation applications where long travel is required, integrating a guided carriage to maintain alignment over extended runs. The unit accommodates electronic drive options and operates within common factory temperature ranges.
Features & Benefits
• 100% duty cycle enables continuous operation without downtime
• Recirculating ball bearing guide maintains precise linear motion
• Maximum speed 1500mm/s supports Rapid traverse requirements
• Compatible with servo and stepper motor technology for control flexibility
• IP40 rating allows use in controlled, indoor production areas
• Operates up to +50°C for higher ambient temperature tolerance
• Recirculating ball bearing guide maintains precise linear motion
• Maximum speed 1500mm/s supports Rapid traverse requirements
• Compatible with servo and stepper motor technology for control flexibility
• IP40 rating allows use in controlled, indoor production areas
• Operates up to +50°C for higher ambient temperature tolerance
Applications
• Suitable for pick-and-place systems requiring long travel
• Ideal for machine tool feed axes with high duty demands
• Used with robotic end-of-arm tooling for linear positioning
• Can be used for conveyor diverting and sorting mechanisms
• Suitable for inspection rigs needing repeatable linear motion
• Ideal for machine tool feed axes with high duty demands
• Used with robotic end-of-arm tooling for linear positioning
• Can be used for conveyor diverting and sorting mechanisms
• Suitable for inspection rigs needing repeatable linear motion
What stroke length options does it provide for long-reach tasks?
The actuator offers an 1800mm travel length, providing extended single-axis movement without intermediate joints.
Which motor drive types can be installed for motion control?
It accepts either servo motors or stepper motors, allowing choice between closed-loop precision and open-loop simplicity.
How does the guide type affect positional accuracy under load?
The recirculating ball bearing guide reduces lateral play and distributes load along the carriage to sustain accurate travel over the full stroke.
What operational environment constraints should be considered?
The unit is rated IP40, so it is intended for clean indoor settings and has a maximum operating temperature of +50°C.