Chauvin Arnoux CA 6117 Electrical Tester

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

CA 6117 Multifunction Installation Tester (EU Version)

Rugged, compact and lightweight, the C.A 6117 tester is specially designed for quick and effective familiarization. Its large backlit graphic colour LCD screen is particularly easy to read. A rotary switch on the instrument’s front panel gives direct access to all the functions. A large number of audio signals and visual symbols facilitate quick interpretation of the results in accordance with the standards. The colour-coded terminals simplify connection. A neck-strap is also provided for “hands-free” use.

Installation testing according to the international standards (IEC 60364-6, NF C 15-100, VDE 100, XP C 16-600, etc.)
Quick operation and simple access to measurements
User-friendly with its extra-wide backlit graphic screen
Excellent measurement stability, including in industrial environments affected by disturbances
Simple, reliable connections
Contextual help for each function
Suitable for all types of neutral systems (TT, TN, IT)
Customized, hierarchical storage of measurement results
USB output for data transfer
The C.A 6117 is also fitted with type-B RCD testing, built-in fuse table and voltage drop feature

Standards

IEC 61010 -1 – 600 V CAT III – 300 V CAT IV – IEC 61557

Supplied with

Tester, 1 carrying bag, 1 type-2 mains power pack / charger, 1 Li-Ion battery pack, 1 USB A/B cable 1.80 m with ferrite, 1 three-point cable - 3 safety leads (red, blue and green), 3 test probes Ø 4 mm (red, blue and green), 3 crocodile clips (red, blue and green), 2 elbowed-straight safety leads 3 m (red and black), 1 three-point mains cable, 1 x 2P mains cable, 1 remote-control probe, 1 wrist strap, 1 scratch-proof film mounted on the instrument, 1 x 4-point hands-free strap, ICT data export software on CD-ROM, 6 operating manuals on CD, 1 safety datasheet in 20 languages.

Specificaties
Kenmerk Waarde
Loop Impedance Test Type Phase to Earth
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V dc
Maximum Voltage Measurement 550V ac/dc
Test Type Continuity
Earth Resistance Measurement Yes
Continuity Test Current 200mA
RCD Test Type AC Type, DC Selective
Remote Switch Mode Yes
Test Standards IEC 61010-1-600 V CAT III-300 V CAT IV-IEC 61557
Safety Category Level CAT III, CAT IV
Safety Category Voltage 300 V, 600 V
Weight 2.2kg
Safety Category CAT III 600 V, CAT IV 300 V
Height 128mm
Model Number p CA 6117
Dimensions 280 x 190 x 128mm
Battery Type Li-ion
IP Rating IP53
Width 190mm
Power Source Battery
Maximum Continuity Resistance 399.9Ω
Display Type Graphic Monochrome LCD Display
Length 280mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.729,00
(excl. BTW)
2.092,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.729,00
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
An in-line holder to connect individual components with ...
Description:
An in-line holder to connect individual components with 4mm safety test leads. Holder comprises 2x4mm safety plugs and 2x4mm safety sockets rated at 600V (CAT II)Component solder connections are provided within the screw-together adaptor casing Components clearly visible through transparent ...
Support Accessories:. Multifunction installation testers to verify the ...
Description:
Support Accessories:. Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applicationsMeet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulationsLarge illuminated display with exceptionally wide viewing angleRugged: ...
Ø 4 mm safety component holder for experimental ...
Description:
Ø 4 mm safety component holder for experimental circuit board SET4.Component mounting: welded onto terminals supplied.Protection level: IP2X.Available in two-pole or four-pole versions.For use in education, research and development etc.