Vishay SIPQ32433BDN-T1E3 Electronic Fuse, 22V
- RS-stocknr.:
- 214-809
- Fabrikantnummer:
- SIPQ32433BDN-T1E3
- Fabrikant:
- Vishay
Subtotaal (1 rol van 2500 eenheden)*
€ 1.838,56
(excl. BTW)
€ 2.224,66
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Rol(len) | Per rol | Per stuk* |
|---|---|---|
| 1 + | € 1.838,56 | € 0,735 |
*prijsindicatie
- RS-stocknr.:
- 214-809
- Fabrikantnummer:
- SIPQ32433BDN-T1E3
- Fabrikant:
- Vishay
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Vishay | |
| Product Type | Electronic Fuse | |
| Maximum Input Voltage | 22V | |
| Minimum Input Voltage | 2.8V | |
| Current Limit | 4.5A | |
| Maximum Operating Temperature | 150°C | |
| Output Current | 3.5A | |
| Minimum Operating Temperature | -40°C | |
| Package Type | TDFN10 | |
| Pin Count | 10 | |
| Standards/Approvals | RoHS | |
| Series | SIPQ32433 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Vishay | ||
Product Type Electronic Fuse | ||
Maximum Input Voltage 22V | ||
Minimum Input Voltage 2.8V | ||
Current Limit 4.5A | ||
Maximum Operating Temperature 150°C | ||
Output Current 3.5A | ||
Minimum Operating Temperature -40°C | ||
Package Type TDFN10 | ||
Pin Count 10 | ||
Standards/Approvals RoHS | ||
Series SIPQ32433 | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
Vishay SIPQ32433 Series Electronic Fuse, 4.5A Current Limit, 22V Maximum Input Voltage - SIPQ32433BDN-T1E3
This electronic fuse provides controlled power protection for low-voltage electronic systems, acting as a protected switch that limits current and prevents damage from overcurrent conditions. It operates across a wide input range and is intended for integration on Compact PCBs where thermal resilience and regulated output are required.
Features and Benefits:
• 4.5A current limit protects circuits from excessive draw • 3.5A regulated output current supplies downstream loads safely • 2.8V-22V input range supports varied low-voltage supplies • Withstands operating temperatures up to150°C for harsh environments • TDFN10 package delivers a Compact surface-mount solution • RoHS compliance simplifies environmental considerations in designs
Applications
• Suitable for power distribution modules in factory automation • Ideal for protected supply paths in industrial control equipment • Used with battery-powered sensor nodes requiring overcurrent protection • Can be used for board-level power protection in electrical test rigs
What thermal limits should I consider during layout?
The device is rated to operate at temperatures up to150°C, so ensure PCB copper area and thermal vias are sized to dissipate heat for sustained loads near its current limit.
How does the device behave with low-voltage supplies?
It accepts inputs down to2.8V, allowing use with common low-voltage rails and ensuring functional protection at reduced system voltages.
Are there package considerations for automated assembly?
The component is supplied in a TDFN10 surface-mount footprint with10 pins, compatible with standard pick-and-place and reflow processes.
Can it replace automotive-grade components in designs?
It is not specified as an automotive-standard part, so it can serve as a non-automotive alternative where automotive qualification is not required.
What standards-related constraint affects selection?
The unit conforms to RoHS requirements, which addresses restricted-substance considerations for compliant product assemblies.