The MDL4U Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A

Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension

Transient mode up to 25 kHz

Synchronous Load on/off function Adjustable slew rate in CC mode

Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support

Short circuit test simulates a short at the input

Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)

Remote voltage sensing to compensate for the effect of voltage drop in wires

Operate identical modules in parallel mode for high current applications

OVP/OCP/OPP/OTP and reverse voltage protection

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behaviour.

MDL4U001 Mainframe for MDL4U DC Load Modules

MDL4U002 Mainframe Extension for MDL4U DC Load Modules

MDL4U200 80V/40A/200W DC Load Module_4U

MDL4U252* 80V/20A/250W 2 CH DC Load Module_4U

MDL4U302* 80V/45A/300W 2 CH DC Load Module_4U

MDL4U305 500V/2

The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

Note

This product does not contain rack or any accessories.

Alles selecteren	Attribuut	Waarde
	Merk	BK Precision
	Series	MDL4U
	Product Type	Electronic DC Load
	Load Type	Programmable
	Constant Voltage Mode Range	80 V
	Constant Current Mode Range	120 A
	Constant Resistance Mode Range	10 to 7500 Ω
	Interface Type	LAN, USB, GPIB, RS232
	Constant Wattage Mode Range	600 W
	Operating Modes	Constant Resistance, Constant Current, Constant Voltage
	Standards/Approvals	No

	Alles selecteren
	Merk BK Precision
	Series MDL4U
	Product Type Electronic DC Load
	Load Type Programmable
	Constant Voltage Mode Range 80 V
	Constant Current Mode Range 120 A
	Constant Resistance Mode Range 10 to 7500 Ω
	Interface Type LAN, USB, GPIB, RS232
	Constant Wattage Mode Range 600 W
	Operating Modes Constant Resistance, Constant Current, Constant Voltage
	Standards/Approvals No

BK Precision MDL4U Series Electronic DC Load, 600 W, 80 V, 120 A

GRATIS bezorging voor bestellingen van meer dan € 75,00

Note

Gerelateerde Links