RS PRO Silver Acrylic Resin Conductive Lacquer for PCB, Electronic

Bekijk alle Electronics Varnishes
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 30,30

(excl. BTW)

€ 36,66

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending 26 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 14€ 30,30
15 - 39€ 29,09
40 +€ 27,87

*prijsindicatie

RS-stocknr.:
123-9911
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Product Type

Conductive Lacquer

Colour

Silver

Application

PCB, Electronic

Product Form

Liquid

Package Type

Bottle

Base Material

Acrylic Resin

Package Size

5 g

Standards/Approvals

No

RS PRO Electrically Conductive Paint


This silver conductive paint is primarily used to repair PCB tracks or manually draw a simple circuit. The paint can be used in various ways including to paint-on an electrical screen, or to make electrical connections on non-solderable surfaces.

Product Features


● Touch-dry in around 10 min and usable within your circuit in 30 minutes.

● For full mechanical and electrical properties you should bake it once it is dry at between 121°C to 148°C for 5 mins to 10 mins.

Product Warnings


This paint is flammable.

How to repair a damaged PCB trace


● Identify the damaged area.

● Remove the damaged solder and PCB trace using a scalpel or sharp knife.

● Clean the affected area with a lint-free cloth and isopropyl alcohol.

● Shake bottle vigorously before beginning and replace bottle cap when not in use.

● Paint the new trace (for very fine trace lines, use electrical tape to mask off the area and remove once painted for a clean straight line).

● Leave for 30 minutes then bake for 5 to 10 minutes for maximum mechanical and electrical properties.

Note

Shake vigorously before using and replace cap when not in use.

Warning

Flammable

Gerelateerde Links