Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

RS-stocknr.:: 215-7703
Artikelnummer Distrelec:: 301-36-696
Fabrikantnummer:: A22NE-M-P002-N
Fabrikant:: Omron

Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

Subtotaal (1 eenheid)*

€ 51,16

(excl. BTW)

€ 61,90

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 21 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 51,16

*prijsindicatie

RS-stocknr.:: 215-7703
Artikelnummer Distrelec:: 301-36-696
Fabrikantnummer:: A22NE-M-P002-N
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Mount Type	Panel Mount
	Product Type	Emergency Stop Push Button
	Cutout Diameter	22mm
	Contact Configuration	1 NC
	Push Button Actuation	Twist Release
	Series	A22NE
	Illuminated	No
	IP Rating	IP65
	Colour	Red
	Head Style	Round
	Hazardous Area Certification	No
	Standards/Approvals	No

	Alles selecteren
	Merk Omron
	Mount Type Panel Mount
	Product Type Emergency Stop Push Button
	Cutout Diameter 22mm
	Contact Configuration 1 NC
	Push Button Actuation Twist Release
	Series A22NE
	Illuminated No
	IP Rating IP65
	Colour Red
	Head Style Round
	Hazardous Area Certification No
	Standards/Approvals No

Datasheet-A22NE-M-P002-N

Omron A22NE Series Emergency Stop Push Button, IP65 Ingress Protection, Panel Mount Type - A22NE-M-P002-N

This emergency stop push button is a red, round control designed to provide a rapid mechanical disconnect for machinery and equipment. It is intended for panel installation and offers a robust sealed interface suitable for environments where protection from dust and water ingress is required. The device employs a manual twist-to-release action and presents a single normally closed contact to interrupt circuits when actuated.

Features and Benefits:

• IP65 rated housing prevents dust and water ingress
• Panel mount design enables secure dashboard integration
• 22mm cut-out compatibility simplifies retrofit installation
• Single NC contact ensures circuit interruption on activation
• Twist-release actuation delivers positive manual reset control

Applications

• Suitable for industrial control panels requiring operator E‑stop
• Ideal for machinery safety stations in wet areas
• Used with automated conveyors needing accessible shut-off
• Can be used for retrofit safety upgrades on control cabinets

What mounting preparation does it require?

It fits a 22mm panel hole and secures from the front for straightforward installation into standard control panels.

How is the device reset after activation?

The actuator must be rotated to release it, mechanically restoring the contact to its normal state.

Is the unit illuminated for visibility in low light?

No, the design does not include any illumination

visibility relies on colour and placement.

Can it be used in hazardous classified zones?

The product has no hazardous area certification and should not be specified for classified locations.