Pfannenberg Enclosure Heater, 110V ac, 250 V ac, 150W Output, 150W Input, 150 °C 70mm x 50 mm
- RS-stocknr.:
- 103-544
- Artikelnummer Distrelec:
- 303-67-845
- Fabrikantnummer:
- 17015005007
- Fabrikant:
- Pfannenberg
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 87,05
(excl. BTW)
€ 105,33
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 87,05 |
| 10 - 24 | € 84,08 |
| 25 - 49 | € 79,64 |
| 50 - 99 | € 73,74 |
| 100 + | € 66,33 |
*prijsindicatie
- RS-stocknr.:
- 103-544
- Artikelnummer Distrelec:
- 303-67-845
- Fabrikantnummer:
- 17015005007
- Fabrikant:
- Pfannenberg
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Pfannenberg | |
| Output Power | 150W | |
| Product Type | Enclosure Heater | |
| Air Flow | 61m³/h | |
| Input Power | 150W | |
| Supply Voltage | 110, 250V ac | |
| Surface Temperature | 150°C | |
| Connection Type | Connecting Cable, Plug Terminal | |
| Depth | 50mm | |
| Mount Type | Snap | |
| Width | 70mm | |
| IP Rating | IP20 | |
| Insulated PTC | No | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | UL-RECOG, WEEE, EAC, UKCA, cURus | |
| Frequency | 60Hz | |
| Alles selecteren | ||
|---|---|---|
Merk Pfannenberg | ||
Output Power 150W | ||
Product Type Enclosure Heater | ||
Air Flow 61m³/h | ||
Input Power 150W | ||
Supply Voltage 110, 250V ac | ||
Surface Temperature 150°C | ||
Connection Type Connecting Cable, Plug Terminal | ||
Depth 50mm | ||
Mount Type Snap | ||
Width 70mm | ||
IP Rating IP20 | ||
Insulated PTC No | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals UL-RECOG, WEEE, EAC, UKCA, cURus | ||
Frequency 60Hz | ||
- Land van herkomst:
- DE
Radiant Heaters - Pfannenberg FLH Series
Suitable for both 50Hz or 60Hz operation
Duty cycle 100%
Heating element is PTC (positive temperature coefficient), temperature regulating
Can be mounted in any position (vertical preferred)
Made from extruded aluminium section, clear anodised
Plug-in terminal connection
Cable connection capacity: solid 2 x 0.5 - 2.5mm2; fine stranded (tinned, with bootlace ferrule or crimp pin) 2 x 0.5 - 1.5mm2
DIN-rail mounting (EN 50022 35mm)
Operating temperature -20°C to +70°C
Storage temperature -40°C to +70°C
Environmental rating IP20
DIN Rail Mount Enclosure Heaters
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
Note
Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600
Approvals
UL
Gerelateerde Links
- Pfannenberg Enclosure Heater 100W Output 150 °C 60 mm x 102 mm
- nVent HOFFMAN Enclosure Heater 150W Output, 150W Input 70 mm x 50 mm
- Eaton Enclosure Heater 150W Output 70 mm x 50 mm
- Pfannenberg Enclosure Heater 150W Output 150 W Input, 150 °C 70 mm x 50 mm
- Schneider Electric Enclosure Heater 150W Output, 150W Input 80 mm x 70 mm
- nVent HOFFMAN Enclosure Heater 60W Output, 150W Input 70 mm x 50 mm
- Schneider Electric Enclosure Heater 150W Output, 150W Input 60 mm x 90 mm
- Pfannenberg Enclosure Heater 45W Output 150 °C 60 mm x 102 mm