Log in / Registreer om gebruik te maken van uw voordelen
Onlangs gezocht

    RS PRO Enclosure Heater, 110V ac, 40W Output, 88°C, 70mm x 121mm x 67mm

    Bekijk deze categorie
    Bulkkorting beschikbaar

    Prijs Per stuk

    € 37,14

    (excl. BTW)

    € 44,94

    (incl. BTW)

    selecteer of typ hoeveelheid
    40 op voorraad - levertijd is 4 werkdag(en).*

    * Bezorgdata kunnen veranderen afhankelijk van de gekozen hoeveelheid en het bezorgadres.

    Aantal stuks
    Per stuk
    1 - 4€ 37,14
    5 - 9€ 37,10
    10 - 24€ 35,91
    25 - 49€ 35,17
    50 +€ 34,39
    RS-stocknr.:
    500-128
    Fabrikant:
    RS PRO

    RS PRO Anti-Condensation Heaters


    A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.

    A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.

    Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.

    A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.

    Features and Benefits


    • Vitreous enamelled resistor

    • Sheet Steel case

    • Perforated sheet Steel cover

    Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom

    Why RS PRO?


    Looking to reduce costs but keep the same quality?
    With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
    Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.

    Note

    The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

    Gerelateerde Links