RS PRO Enclosure Heater, 110V ac, 200W Output, 200W Input 140mm x 115 mm
- RS-stocknr.:
- 754-5529
- Fabrikant:
- RS PRO
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 148,74
(excl. BTW)
€ 179,98
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 15 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 148,74 |
*prijsindicatie
- RS-stocknr.:
- 754-5529
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Enclosure Heater | |
| Output Power | 200W | |
| Input Power | 200W | |
| Supply Voltage | 110V ac | |
| Depth | 115mm | |
| Width | 140mm | |
| IP Rating | IP20 | |
| Standards/Approvals | No | |
| Nominal Current | 1.81A | |
| Frequency | 60Hz | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Enclosure Heater | ||
Output Power 200W | ||
Input Power 200W | ||
Supply Voltage 110V ac | ||
Depth 115mm | ||
Width 140mm | ||
IP Rating IP20 | ||
Standards/Approvals No | ||
Nominal Current 1.81A | ||
Frequency 60Hz | ||
- Land van herkomst:
- GB
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
Features and Benefits
Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Note
The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
Gerelateerde Links
- RS PRO Enclosure Heater 200W Output, 200W Input 140mm x 115 mm
- STEGO Enclosure Heater 200W Output, 200W Input 119mm x 151 mm
- STEGO Enclosure Heater 200W Output, 200W Input 168mm x 179 mm
- STEGO 230V ac 200W Input 80mm x 160 mm
- STEGO 24V dc 200W Input 65mm x 90 mm
- STEGO 24V dc 200W Input 85mm x 111 mm
- STEGO 230V ac 200W Input 60mm x 120 mm
- Pfannenberg 230V 215W Input 88mm x 126 mm