Broadcom AFBR-S6PY2626 Environmental Sensor for Gas Leak Detectors & Alarm
- RS-stocknr.:
- 281-3002P
- Fabrikantnummer:
- AFBR-S6PY2626
- Fabrikant:
- Broadcom
Subtotaal 1 eenheid (geleverd in een buis)*
€ 44,22
(excl. BTW)
€ 53,51
(incl. BTW)
Voeg 2 eenheden toe voor gratis bezorging
Op voorraad
- Plus verzending 100 stuk(s) vanaf 05 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 44,22 |
*prijsindicatie
- RS-stocknr.:
- 281-3002P
- Fabrikantnummer:
- AFBR-S6PY2626
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Environmental Sensor | |
| Response Time | 10ms | |
| Application | Gas Leak Detectors & Alarm | |
| Sub Type | Pyroelectric Extended Infrared | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 1.75V | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Package Type | Surface Mount | |
| Maximum Operating Temperature | 85°C | |
| Length | 5.65mm | |
| Standards/Approvals | No | |
| Height | 1.75mm | |
| Series | ezPyro | |
| Width | 3.7 mm | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Environmental Sensor | ||
Response Time 10ms | ||
Application Gas Leak Detectors & Alarm | ||
Sub Type Pyroelectric Extended Infrared | ||
Mount Type Surface | ||
Minimum Supply Voltage 1.75V | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Package Type Surface Mount | ||
Maximum Operating Temperature 85°C | ||
Length 5.65mm | ||
Standards/Approvals No | ||
Height 1.75mm | ||
Series ezPyro | ||
Width 3.7 mm | ||
- Land van herkomst:
- MY
The Broadcom thin film pyroelectric infrared (IR) sensors for gas detection and other substance concentration measurements, The main use of this high sensitivity device is CO2 detection. It is High-performance current mode sensor that achieves a signal-to-noise of 10,000 and offers a fast, stable response over a wide operating frequency range. The sensor elements are built into a low noise circuit that has an internal CMOS op amp, with a 10 GΩ feedback resistor outputting a voltage signal centered on half the supply rail. This product is lead-free and compliant with RoHS.
High sensitivity
Thermally stable to slow drift and thermal shock
Extended temperature range
Less external gain required
Reliable and easy to use