RS PRO 50mm x x 66 m Clear Film ESD Safe Tape

Bekijk alle ESD Tapes
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 28,19

(excl. BTW)

€ 34,11

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 39 stuk(s) vanaf 20 april 2026
  • Plus verzending 212 stuk(s) vanaf 20 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
1 - 9€ 28,19
10 - 19€ 27,07
20 +€ 26,22

*prijsindicatie

RS-stocknr.:
340-7533
Artikelnummer Distrelec:
304-07-032
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Product Type

ESD Safe Tape

Backing Material

Clear Film

Length

66m

Width

50mm

Dissipative

No

Conductivity

Non-Conductive

Anti-Static

No

Cleanroom

No

Text/Logo On Tape

ESD Protected Area

Colour

Black, Yellow

Complies with EN 61340-5-1

Yes

Standards/Approvals

No

Land van herkomst:
GB

RS PRO 50 mm x 66 m ESD Tape


This RS PRO marking tape lets you provide a clear warning that people are entering an ESD (electrostatic discharge) controlled area. Found in commercial and industrial settings, it's used in server rooms and labs. It's suitable for marking out the floor area of EPA, as well as fastening to walls.

You'll find 66 metres of ESD tape inside this pack. It's coated with a transparent PVC for added protection during use. It has an attention-grabbing black and yellow design, with the ESD logo and bold text.

You should carefully check that the contact surfaces are totally dry and clean from oil, grease and dust before use. This product should be stored in a dry environment, with a temperature between +18°C and +30°C. It should be kept away from dust, humidity and direct sun exposure.

Features and Benefits


• ESD controlled area warning tape

• Length of 66 m

• Black and yellow tape

• Coated with a transparent PVC film

• Film thickness of 32 μm (micrometre) (± 10%)

• Carrier thickness of 75 μm (± 5%)

• Adhesive weight of 18 g/m² (± 5%)

• Total thickness of 93 μm (± 5%)

• Tensile strength of 160 N/mm² (± 30)

• Elongation at break of 75% (± 30%)

• Solvent-based adhesive with natural rubber

• Peel adhesion of 4 N/25mm (± 1)

• Shear adhesion of > 300 h

• Service temperature of +18°C to +85°C

• Application temperature of ≥18°C

• Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards

• RoHS (Restriction of Hazardous Substances) compliant

RS PRO


RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Gerelateerde Links