Fortex PCB Preparation & Etching Machine
- RS-stocknr.:
- 193-2028
- Fabrikantnummer:
- PA110
- Fabrikant:
- Fortex
Subtotaal (1 eenheid)*
€ 407,76
(excl. BTW)
€ 493,39
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 407,76 |
*prijsindicatie
- RS-stocknr.:
- 193-2028
- Fabrikantnummer:
- PA110
- Fabrikant:
- Fortex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fortex | |
| Tank Types Included | Bubble Etch | |
| Alles selecteren | ||
|---|---|---|
Merk Fortex | ||
Tank Types Included Bubble Etch | ||
- Land van herkomst:
- DE
A range of bubble Etch tanks designed to be used in laboratory and small batch production for producing printed circuit boards as well as for etching metal foils used in model making.
Special feature of the device is the tank manufactured from acrylic glass. Thereby the etching process can be observed at any time.
During the etching process, tiny air bubbles will be fed into the etching fluid. This is a diaphragm pump and an aeration frame with air curtain tube in the bottom of the device is used.
The etching tanks include an adjustable glass heater for heating up the etching solution up to 45°C. There is an adjustable PCB-holder for carrying the printed circuit boards during etching and a thermometer.
Special feature of the device is the tank manufactured from acrylic glass. Thereby the etching process can be observed at any time.
During the etching process, tiny air bubbles will be fed into the etching fluid. This is a diaphragm pump and an aeration frame with air curtain tube in the bottom of the device is used.
The etching tanks include an adjustable glass heater for heating up the etching solution up to 45°C. There is an adjustable PCB-holder for carrying the printed circuit boards during etching and a thermometer.