Microchip KSZ8061RNDW, Ethernet Transceiver, 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN

Bekijk alle Ethernet Interface Ics

Subtotaal (1 verpakking van 4 eenheden)*

€ 7,532

(excl. BTW)

€ 9,112

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Op voorraad
  • Plus verzending 908 stuk(s) vanaf 23 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
4 +€ 1,883€ 7,53

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
122-4833
Fabrikantnummer:
KSZ8061RNDW
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Ethernet Transceiver

Maximum Data Rate

100Mbps

Sub Type

Transceiver

Communication Mode

100Base-TX, 10Base-T

Number of Transceivers

1

Loopback Mode

Local (Digital) Loopback, Remote (Analogue) Loopback

Standard Supported

IEEE 802.3az

Interface Type

RMII

Mount Type

Surface

Package Type

QFN

Pin Count

32

Maximum Supply Voltage

3.3V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

Width

5 mm

Minimum Supply Voltage

3.3V

Length

5mm

Standards/Approvals

IEEE 802.3az, AEC-Q100

Height

0.8mm

Supply Current

59mA

Automotive Standard

AEC-Q100

KSZ8061R 10/100 Ethernet Transceiver


The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.

Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.

This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.

Features


Quiet-WIRE® Programmable EMI Filter

Exceeds AEC-Q100 and EMC requirements

MII interface with MDC/MDIO management interface for register configuration

On-chip Termination Resistors for differential pairs

LinkMD®+ Receive Signal Quality Indicator

Supports IEEE 802.3az Energy Efficient Ethernet

Ultra Deep Sleep standby mode

Loopback mode for diagnostics

Programmable interrupt output

Ethernet Communications - Microchip


Gerelateerde Links