Microchip KSZ8794CNXCC, Ethernet Switch IC, 3.3 V 100 Mbps RMII, MDIO, MII, MDC, RGMII, SPI, 64-Pin 3.3V QFN
- RS-stocknr.:
- 177-3946P
- Fabrikantnummer:
- KSZ8794CNXCC
- Fabrikant:
- Microchip
Subtotaal 2 eenheden (geleverd op een tray)*
€ 9,42
(excl. BTW)
€ 11,40
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1.036 stuk(s) vanaf 29 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 2 + | € 4,71 |
*prijsindicatie
- RS-stocknr.:
- 177-3946P
- Fabrikantnummer:
- KSZ8794CNXCC
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Switch IC | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Layer 2 Managed Ethernet Switch | |
| Communication Mode | MDIO, SPI, MDC | |
| Number of Transceivers | 4 | |
| Loopback Mode | Multiple Loopback of Remote Phy and Mac Modes | |
| Standard Supported | IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | |
| Interface Type | RMII, MDIO, MII, MDC, RGMII, SPI | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 64 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 0.8mm | |
| Length | 8mm | |
| Minimum Supply Voltage | 3.3V | |
| Standards/Approvals | RoHS, Lead-Free | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Switch IC | ||
Maximum Data Rate 100Mbps | ||
Sub Type Layer 2 Managed Ethernet Switch | ||
Communication Mode MDIO, SPI, MDC | ||
Number of Transceivers 4 | ||
Loopback Mode Multiple Loopback of Remote Phy and Mac Modes | ||
Standard Supported IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | ||
Interface Type RMII, MDIO, MII, MDC, RGMII, SPI | ||
Mount Type Surface | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 64 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 0.8mm | ||
Length 8mm | ||
Minimum Supply Voltage 3.3V | ||
Standards/Approvals RoHS, Lead-Free | ||
Automotive Standard No | ||
The KSZ8794CNX is a highly integrated, Layer 2 managed, four-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8794CNX incorporates a small package outline, low power consumption with internal biasing, and on-chip termination
Integrated 4-port 10/100 Layer-2 switch with Gigabit uplink
New generation switch with three MACs, one GMAC (for uplink) and three PHYs
10/100Base-T/TX switch system which combines a switch engine, frame buffer management, address lookup table, queue management, MIB counters, MAC, and PHY transceivers
Rapid spanning tree support (RSTP) for topology management
Microchip's LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Advanced Switch Capabilities
VLAN support for up to 128 active VLAN groups (full range 4096 of VLAN IDs)