Microchip, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN

RS-stocknr.:: 178-5356
Fabrikantnummer:: LAN9252I/ML
Fabrikant:: Microchip

Microchip, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN

Subtotaal (1 tray van 260 eenheden)*

€ 2.012,40

(excl. BTW)

€ 2.436,20

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

260 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tray*
260 +	€ 7,74	€ 2.012,40

*prijsindicatie

RS-stocknr.:: 178-5356
Fabrikantnummer:: LAN9252I/ML
Fabrikant:: Microchip

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Microchip
	Product Type	Ethernet Controller
	Maximum Data Rate	100Mbps
	Communication Mode	Full Duplex/Half Duplex
	Loopback Mode	Internal
	Standard Supported	ANSI X3.263, IEEE 802.3u, IEEE 802.3
	Interface Type	Host Bus
	Mount Type	Surface
	Package Type	QFN
	Pin Count	64
	Maximum Supply Voltage	3.3V
	Minimum Operating Temperature	85°C
	Maximum Operating Temperature	-40°C
	Standards/Approvals	No
	Minimum Supply Voltage	3.3V
	Width	9 mm
	Height	1mm
	Length	9mm
	Automotive Standard	No

	Alles selecteren
	Merk Microchip
	Product Type Ethernet Controller
	Maximum Data Rate 100Mbps
	Communication Mode Full Duplex/Half Duplex
	Loopback Mode Internal
	Standard Supported ANSI X3.263, IEEE 802.3u, IEEE 802.3
	Interface Type Host Bus
	Mount Type Surface
	Package Type QFN
	Pin Count 64
	Maximum Supply Voltage 3.3V
	Minimum Operating Temperature 85°C
	Maximum Operating Temperature -40°C
	Standards/Approvals No
	Minimum Supply Voltage 3.3V
	Width 9 mm
	Height 1mm
	Length 9mm
	Automotive Standard No

Datasheet

LAN9252 EtherCAT® Slave Controllers

The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.

Features

2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers

Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus

Dual integrated Ethernet PHYs with HP Auto-MDIX

Cable diagnostic support

100BASE-FX support via an External Transceiver

1.8V to 3.3V variable voltage I/O

Integrated 1.2V Regulator for single 3.3V operation

Microchip, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN

GRATIS bezorging voor bestellingen van meer dan € 75,00

LAN9252 EtherCAT® Slave Controllers

Features

Ethernet Communications - Microchip

Gerelateerde Links