Microchip LAN9252I/PT, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V TQFP
- RS-stocknr.:
- 880-6718
- Fabrikantnummer:
- LAN9252I/PT
- Fabrikant:
- Microchip
Subtotaal (1 eenheid)*
€ 10,17
(excl. BTW)
€ 12,31
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 10,17 |
*prijsindicatie
- RS-stocknr.:
- 880-6718
- Fabrikantnummer:
- LAN9252I/PT
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Standard Supported | IEEE 802.3, ANSI X3.263, IEEE 802.3u | |
| Interface Type | Host Bus | |
| Mount Type | Surface | |
| Package Type | TQFP | |
| Pin Count | 64 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Length | 10mm | |
| Minimum Supply Voltage | 3.3V | |
| Height | 1.2mm | |
| Width | 10 mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Standard Supported IEEE 802.3, ANSI X3.263, IEEE 802.3u | ||
Interface Type Host Bus | ||
Mount Type Surface | ||
Package Type TQFP | ||
Pin Count 64 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Length 10mm | ||
Minimum Supply Voltage 3.3V | ||
Height 1.2mm | ||
Width 10 mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Features
2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus
Dual integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100BASE-FX support via an External Transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V Regulator for single 3.3V operation
Ethernet Communications - Microchip
Gerelateerde Links
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V TQFP
- Microchip LAN9252I/ML 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3 V QFN
- Microchip 3.3 V 100 Mbps Host Bus 100-Pin 3.3 V TQFP
- Microchip LAN9218i-MT 3.3 V 100 Mbps Host Bus 100-Pin 3.3 V TQFP
- Microchip LAN9218-MT 3.3 V 100 Mbps Host Bus 100-Pin 3.3 V TQFP
- Microchip ENC624J600-I/PT 3.3 V 100 Mbps Serial-SPI, 64-Pin 3.6 V TQFP
- Microchip 1.62 V 100 Mbps SMI 56-Pin 3.3 V QFN