Microchip, Ethernet Transceiver, 3.3 V RGMII, 48-Pin 3.3 V QFN
- RS-stocknr.:
- 198-1197P
- Fabrikantnummer:
- KSZ9131RNXI
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een tray)*
€ 74,20
(excl. BTW)
€ 89,775
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 25 - 95 | € 2,968 |
| 100 - 495 | € 2,86 |
| 500 + | € 2,848 |
*prijsindicatie
- RS-stocknr.:
- 198-1197P
- Fabrikantnummer:
- KSZ9131RNXI
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Transceiver | |
| Communication Mode | Full Duplex/Half Duplex | |
| Number of Transceivers | 1 | |
| Loopback Mode | Internal | |
| Interface Type | RGMII | |
| Standard Supported | IEEE 802.3 | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Length | 7mm | |
| Width | 7 mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Transceiver | ||
Communication Mode Full Duplex/Half Duplex | ||
Number of Transceivers 1 | ||
Loopback Mode Internal | ||
Interface Type RGMII | ||
Standard Supported IEEE 802.3 | ||
Mount Type Surface | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1mm | ||
Standards/Approvals No | ||
Length 7mm | ||
Width 7 mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The Microchip KSZ9131 is a fully integrated Ethernet transreceiver with triple-speed (10Base-T/100Base-TX/1000Base-T) for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.
Power-down and power-saving modes
Interrupt pin option
Automatic detection and correction of pair swaps, pair skew, and pair polarity
MDC/MDIO management interface for PHY register configuration
Loopback modes for diagnostics
Baseline wander correction
Programmable LED outputs for link, activity, and speed
Wake-on-LAN (WOL) support with robust custom-packet detection