Microchip KSZ8091RNAIA-TR, Ethernet Transceiver, 3.3 V 100 Mbps, 24-Pin 3.3 V QFN
- RS-stocknr.:
- 235-4640P
- Fabrikantnummer:
- KSZ8091RNAIA-TR
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 62,00
(excl. BTW)
€ 75,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 170 stuk(s) vanaf 02 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,24 |
| 100 - 245 | € 1,214 |
| 250 - 495 | € 1,19 |
| 500 + | € 1,166 |
*prijsindicatie
- RS-stocknr.:
- 235-4640P
- Fabrikantnummer:
- KSZ8091RNAIA-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Transceiver | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Transceiver | |
| Standard Supported | IEEE 802.3 | |
| Package Type | QFN | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Supply Voltage | 3.3V | |
| Width | 4 mm | |
| Length | 4mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Supply Current | 47mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Transceiver | ||
Maximum Data Rate 100Mbps | ||
Sub Type Transceiver | ||
Standard Supported IEEE 802.3 | ||
Package Type QFN | ||
Pin Count 24 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Supply Voltage 3.3V | ||
Width 4 mm | ||
Length 4mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Supply Current 47mA | ||
Automotive Standard No | ||
The Microchip KSZ8091 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8091 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs, integrating a low-noise regulator to supply the 1.2V core and by offering a flexible 1.8/2.5/3.3V digital I/O interface.
Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet transceiver
Wake-on-LAN support with either magic packet, link status change, or robust custom-packet detection
Power-down and power-saving modes
Built-in 1.2V regulator for core
On-chip termination resistors for the differential pairs