Microchip ENC28J60-I/SP, Stand-Alone Ethernet Controller, 3.1 V SPI, 28-Pin 3.6V
- RS-stocknr.:
- 698-8981
- Fabrikantnummer:
- ENC28J60-I/SP
- Fabrikant:
- Microchip
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 698-8981
- Fabrikantnummer:
- ENC28J60-I/SP
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Stand-Alone Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | SPI | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | SPI | |
| Number of Ports | 1 | |
| Mount Type | Through Hole | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Minimum Supply Voltage | 3.1V | |
| Height | 5.02mm | |
| Length | 35.5mm | |
| Width | 7.4mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Stand-Alone Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode SPI | ||
Standard Supported IEEE 802.3 | ||
Interface Type SPI | ||
Number of Ports 1 | ||
Mount Type Through Hole | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Minimum Supply Voltage 3.1V | ||
Height 5.02mm | ||
Length 35.5mm | ||
Width 7.4mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for Faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
Gerelateerde Links
- Microchip ENC28J60-I/SO 3.3 V Serial-SPI, 28-Pin 3.6V SOIC
- Microchip ENC28J60-I/SS 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6V SSOP
- Microchip ENC28J60-I/ML 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6V QFN EP
- Microchip 3.3 V Serial-SPI, 28-Pin 3.6V SOIC
- Microchip ENC28J60-I/SP 28-Pin SPDIP
- Microchip 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6V SSOP
- Microchip 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6V QFN EP
- Microchip 3.3 V 100 Mbps Serial-SPI, 44-Pin 3.6V TQFP