Microchip ENC28J60-I/SS, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6V SSOP
- RS-stocknr.:
- 770-7755P
- Fabrikantnummer:
- ENC28J60-I/SS
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd in een buis)*
€ 33,95
(excl. BTW)
€ 41,08
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 34 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 22 | € 3,395 |
| 24 - 98 | € 3,215 |
| 100 + | € 3,13 |
*prijsindicatie
- RS-stocknr.:
- 770-7755P
- Fabrikantnummer:
- ENC28J60-I/SS
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Maximum Data Rate | 10Mbps | |
| Product Type | Controller IC | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | Serial-SPI | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Length | 10.5mm | |
| Standards/Approvals | No | |
| Height | 2mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Maximum Data Rate 10Mbps | ||
Product Type Controller IC | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Standard Supported IEEE 802.3 | ||
Interface Type Serial-SPI | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 28 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Length 10.5mm | ||
Standards/Approvals No | ||
Height 2mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.