Fan Speed Controller, Infinitely Variable, 230 V ac, 1A

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

VAC2-1/RFI 1A Fan Speed Controller + RFI Filter

The VAC2-1/RFI is a compact variable phase-angle regulator of open construction and suitable for 230V single-phase operation with mains driven inductive loads, such as induction motors, fans and pumps. An integral choke/capacitor RFI circuit enables the controller to meet current EMC standards for emissions.

Infinitely variable 0-98% output
Maximum RMS on-state current: 1A
Minimum operating current: 100mA
Minimum Set Speed Adjuster
Large triac for inrush protection
Integral RC Snubber
Integral EMC filtering
Peak one cycle surge @ 10mS: 80A
I²t for fusing: 36A²s
Isolation voltage: 2500 Vrms
Maximum recommended unit temperature: +70ºC
Mains supply: 230 Vac ±10% @ 50/60Hz
Single hole fixing

Specificaties
Kenmerk Waarde
For Use With AC Fans
Speed Settings Infinitely Variable
Maximum Current 1A
Supply Voltage 230 V ac
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
22 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
37,71
(excl. BTW)
45,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 37,71
5 - 9
€ 34,28
10 - 24
€ 31,43
25 - 49
€ 28,98
50 +
€ 26,93
Related Products
Designed to control the Xpelair range of GX, ...
Description:
Designed to control the Xpelair range of GX, WX and RX 9in and 12in fans. On/off switch with ’power on’ indicationChoice of high/low speed operationIntake/extract direction controlCan be recess or surface mounted3 year on-site warranty.
TC4830 series of analogue Temperature Controllers is the ...
Description:
TC4830 series of analogue Temperature Controllers is the ideal solution for a simple ON/OFF or proportional control, while also being extremely cost effective. Selection of either ON/OFF or proportional controlSupports J, K, T thermocouples or 3-wire PT100 inputsVarious temperature ranges ...
The IR33 series of universal electronic controllers from ...
Description:
The IR33 series of universal electronic controllers from Carel are a panel mounted controller offering an updated and upgraded module to replace its IR32 predecessor. The IR33 series controllers feature two independent control loops and now with the addition of ...
This series of PID temperature controllers are designed ...
Description:
This series of PID temperature controllers are designed for measuring and controlling a process value. They can be used in many applications with their TC and RTD temperature measurement input, multifunction control outputs & selectable alarm functions.This range of temperature ...