Wurth Elektronik Ferrite Ring EMI Suppression Toroidal Ferrite 6 mm, For: Wrapping Cable, Multiconductor Wire, Coaxial

RS-stocknr.:: 124-1852
Artikelnummer Distrelec:: 304-30-939
Fabrikantnummer:: 74270118
Fabrikant:: Wurth Elektronik

Wurth Elektronik Ferrite Ring EMI Suppression Toroidal Ferrite 6 mm, For: Wrapping Cable, Multiconductor Wire, Coaxial

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 10 eenheden)*

€ 16,18

(excl. BTW)

€ 19,58

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk	Per verpakking*
10 - 490	€ 1,618	€ 16,18
500 +	€ 1,581	€ 15,81

*prijsindicatie

RS-stocknr.:: 124-1852
Artikelnummer Distrelec:: 304-30-939
Fabrikantnummer:: 74270118
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Sub Type	EMI Suppression Toroidal Ferrite
	Product Type	Ferrite Ring
	Application	Wrapping Cable, Multiconductor Wire, Coaxial Cable, Wire
	Minimum Frequency	25MHz
	Material	3 W 800 (Ferrite)
	Maximum Frequency	100MHz
	Height	6mm
	Inside Diameter	12.7mm
	Outside Diameter	21.2mm
	Standards/Approvals	No
	Series	WE-TOF

	Alles selecteren
	Merk Wurth Elektronik
	Sub Type EMI Suppression Toroidal Ferrite
	Product Type Ferrite Ring
	Application Wrapping Cable, Multiconductor Wire, Coaxial Cable, Wire
	Minimum Frequency 25MHz
	Material 3 W 800 (Ferrite)
	Maximum Frequency 100MHz
	Height 6mm
	Inside Diameter 12.7mm
	Outside Diameter 21.2mm
	Standards/Approvals No
	Series WE-TOF

Wurth Elektronik EMI Toroid Datasheet

Wurth Elektronik WE-TOF Series Ferrite Ring, 21.2mm Outside Diameter, 12.7mm Inside Diameter - 74270118

This ferrite ring is an EMI suppression toroidal component designed to reduce high-frequency interference on wrapped cable, multiconductor wire and coaxial cable within typical electronic interconnects. Made from 3W 800 ferrite material, it provides targeted attenuation across a specified band while remaining Compact for inline placement on wire bundles and individual conductors.

Features and Benefits:

• 25 to 100MHz attenuation band reduces mid-range RF interference
• Toroidal geometry minimises external magnetic field leakage
• 3W 800 ferrite composition improves common-mode suppression
• 6mm height enables tight axial accommodation on harnesses
• Compact form assists retrofitting without connector removal

Applications

• Suitable for wrapping cable to suppress conducted noise
• Used with multiconductor wire in harness assemblies
• Ideal for coaxial cable to reduce RF emissions
• Can be used for general wire EMI/RFI suppression
• Suitable for toroidal EMI filter installations in equipment

What frequency range does the material effectively target?

It is specified to operate between 25MHz and 100MHz for interference reduction.

How does the component attach to cable bundles?

Its toroidal shape allows wires to be passed through the central aperture for direct coupling without additional hardware.

What are the aperture and external diameters relevant for cable fit?

The central opening measures 12.7mm and the outside diameter is 21.2mm for sizing cables and bundles.

Which material characteristics influence performance?

The 3W 800 ferrite grade is selected for its magnetic properties that enhance common-mode choke behaviour.

Are there constraints on axial space when installing?

The ring has a height of 6mm, informing clearance requirements on wire harnesses.