Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

RS-stocknr.:: 144-9783
Fabrikantnummer:: 74270033
Fabrikant:: Wurth Elektronik

Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

Subtotaal (1 zak van 500 eenheden)*

€ 258,00

(excl. BTW)

€ 312,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 9.000 stuk(s) vanaf 26 oktober 2026
Plus verzending 1.000 stuk(s) vanaf 23 november 2026
Plus verzending 1.000 stuk(s) vanaf 05 april 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Zak*
500 +	€ 0,516	€ 258,00

*prijsindicatie

RS-stocknr.:: 144-9783
Fabrikantnummer:: 74270033
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Product Type	Ferrite Ring
	Sub Type	EMI Suppression Axial Ferrite Bead
	Minimum Frequency	25MHz
	Application	Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material	3 W 800 (Ferrite)
	Height	9.5mm
	Maximum Frequency	100MHz
	Inside Diameter	4.75mm
	Outside Diameter	9.5mm
	Standards/Approvals	RoHS, REACH
	Series	WE-AFB

	Alles selecteren
	Merk Wurth Elektronik
	Product Type Ferrite Ring
	Sub Type EMI Suppression Axial Ferrite Bead
	Minimum Frequency 25MHz
	Application Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material 3 W 800 (Ferrite)
	Height 9.5mm
	Maximum Frequency 100MHz
	Inside Diameter 4.75mm
	Outside Diameter 9.5mm
	Standards/Approvals RoHS, REACH
	Series WE-AFB

Datasheet

Land van herkomst:: TW

Wurth Elektronik WE-AFB Series Ferrite Ring, 9.5mm Outside Diameter, 4.75mm Inside Diameter - 74270033

This ferrite ring is a magnetic suppression component designed to reduce electromagnetic interference on wrapped and coaxial conductors and on wire bundles. It is manufactured from 3W800 ferrite material and intended for insertion onto cables to attenuate common-mode noise within a medium-frequency band while complying with environmental substance regulations.

Features and Benefits:

• 25 to 100MHz frequency range attenuates mid-band interference
• 3W800 ferrite material provides targeted impedance rise
• Axial configuration enables simple in-line installation
• Compatible with multiconductor assemblies for broad mitigation
• RoHS and REACH conformity supports regulated product builds

Applications

• Used with coaxial cable for signal integrity protection
• Suitable for wrapping cable to suppress radiated noise
• Used for multiconductor wire EMI reduction in harnesses
• Ideal for axial placement in wire assembly runs
• Can be used as a ferrite choke on cable bundles

What physical sizes determine fit on a cable?

The component has a 9.5mm outside diameter and a 4.75mm inside diameter which set its fit range for cable jackets.

Which frequency band does it principally affect?

It provides attenuation primarily across the 25MHz to 100MHz band where many common-mode disturbances occur.

What material properties influence its electrical behaviour?

The 3W800 ferrite composition yields impedance characteristics tailored for mid-frequency noise suppression, increasing reactance with frequency.

Can it be applied to both single and multiple conductors?

Yes, the axial ferrite bead design is compatible with single coaxial cores and bundled multiconductor runs for EMI reduction.

What regulatory attributes are present for integration?

It meets RoHS and REACH provisions relevant to restricted substances for many industrial supply chains.