Wurth Elektronik Ferrite Ring Toroid Core 12.7 mm, For: EMI Suppression 35.5 mm ID 61 mm OD

RS-stocknr.:: 163-4540
Fabrikantnummer:: 74270097
Fabrikant:: Wurth Elektronik

Wurth Elektronik Ferrite Ring Toroid Core 12.7 mm, For: EMI Suppression 35.5 mm ID 61 mm OD

Subtotaal (1 tray van 15 eenheden)*

€ 79,20

(excl. BTW)

€ 95,85

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 15 stuk(s) vanaf 26 oktober 2026
Plus verzending 15 stuk(s) vanaf 26 oktober 2026
Plus verzending 90 stuk(s) vanaf 02 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tray*
15 +	€ 5,28	€ 79,20

*prijsindicatie

RS-stocknr.:: 163-4540
Fabrikantnummer:: 74270097
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Sub Type	Toroid Core
	Product Type	Ferrite Ring
	Application	EMI Suppression
	Minimum Frequency	25MHz
	Material	4W620
	Height	12.7mm
	Maximum Frequency	100MHz
	Inside Diameter	35.5mm
	Outside Diameter	61mm
	Standards/Approvals	REACH, RoHS
	Series	WE-TOF

	Alles selecteren
	Merk Wurth Elektronik
	Sub Type Toroid Core
	Product Type Ferrite Ring
	Application EMI Suppression
	Minimum Frequency 25MHz
	Material 4W620
	Height 12.7mm
	Maximum Frequency 100MHz
	Inside Diameter 35.5mm
	Outside Diameter 61mm
	Standards/Approvals REACH, RoHS
	Series WE-TOF

EMI Toroid 61 OD x 35.5 ID x 12.7mm Data Sheet

Land van herkomst:: TW

Wurth Elektronik WE-TOF Series Ferrite Ring, 61mm Outside Diameter, 35.5mm Inside Diameter - 74270097

This ferrite ring is a toroidal core designed to reduce electromagnetic interference in cable and wiring systems. It is produced from 4W620 ferrite material and is intended for suppression of EMI within a defined radio‑frequency band. The component is suitable for suppression of common‑mode noise where frequency‑selective damping is required and meets current environmental substance restrictions.

Features and Benefits:

• 25MHz to 100MHz frequency band suppresses high‑frequency interference
• 4W620 ferrite material provides predictable impedance characteristics
• Toroid geometry enables efficient magnetic coupling for single‑turn cables
• Compliant substance profile supports regulated material use
• 12.7mm cross‑section thickness minimises insertion depth demands

Applications

• Suitable for reducing cable noise on power and signal lines
• Ideal for inserted EMI filtering on external harnesses
• Used with single‑pass conductors to lower common‑mode currents
• Can be used for interference mitigation in consumer electronics
• Suitable for retrofit suppression on existing wiring looms

What frequency range is effective for suppression?

The component is specified to operate between 25MHz and 100MHz for targeted attenuation of high‑frequency disturbances.

What material properties affect performance?

The 4W620 ferrite composition determines permeability and frequency‑dependent impedance used to shape attenuation characteristics.

How does the toroidal shape influence installation?

The ring format allows a conductor to be passed through the bore so magnetic flux couples directly, producing impedance without adding series resistance.

Which dimensional limits affect cable routing?

The inner aperture of 35.5mm sets the maximum single‑pass bundle diameter that can be accommodated.

What regulatory substance statements apply to usage?

The part is declared compliant with RoHS and REACH substance restrictions.