Wurth Elektronik Openable, Diameter 7.5 mm Ferrite Clamp, Apertures: 1 24.6 mm 20.1 mm 36.4 mm, For General Application

This ferrite clamp is an openable single-aperture component designed to reduce conducted interference in general application wiring. It is manufactured from 4W620 material and provides frequency-dependent impedance to suppress high-frequency noise across common signal and power cables. The product is suitable for inline installation where a removable clamp format is required and conforms to RoHS and REACH directives.

• 125Ω impedance at 25MHz provides low-frequency attenuation
• 235Ω impedance at 100MHz offers mid-band suppression
• 145Ω impedance at 500MHz improves high-frequency rejection
• 7.5mm aperture accepts single cable routing
• Openable design allows retrofit installation without cable disconnection

• Suitable for cable noise reduction on control wiring
• Used with harnesses requiring retrofit EMI suppression
• Can be used for suppression on signal and data lines
• Ideal for assemblies needing removable interference clamps

The clamp is formed from 4W620 ferrite material chosen for its frequency-dependent permeability that provides impedance across a broad spectrum.

The external footprint measures 36.4 x 24.6 x 20.1mm so allowance for that envelope is required during installation.

A single aperture of 7.5mm diameter is provided, intended for one conductor or bundled cable within that diameter.

The component meets RoHS and REACH approvals, indicating compliance with applicable substance restrictions for integration.