Wurth Elektronik Openable, Diameter 5 mm Ferrite Sleeve, Apertures: 1 30.3 mm 19 mm 19 mm, For EMI Suppression

RS-stocknr.:: 736-1914
Artikelnummer Distrelec:: 110-63-494
Fabrikantnummer:: 74275812
Fabrikant:: Wurth Elektronik

Wurth Elektronik Openable, Diameter 5 mm Ferrite Sleeve, Apertures: 1 30.3 mm 19 mm 19 mm, For EMI Suppression

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 4,89

(excl. BTW)

€ 5,92

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

479 stuk(s) klaar voor verzending
731 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 4,89
10 - 24	€ 4,70
25 - 49	€ 4,46
50 - 99	€ 4,10
100 +	€ 3,68

*prijsindicatie

RS-stocknr.:: 736-1914
Artikelnummer Distrelec:: 110-63-494
Fabrikantnummer:: 74275812
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Series	STAR-BUENO
	Sub Type	Snap Ferrite
	Product Type	Ferrite Sleeve
	Application	EMI Suppression
	Material	4W620
	Impedance at 25 MHz	122Ω
	Key	No
	Openable	Yes
	Impedance at 100 MHz	206Ω
	Aperture Diameter	5mm
	Number of Apertures	1
	External Depth	30.3mm
	External Width	19mm
	External Height	19mm
	Standards/Approvals	REACH, RoHS

	Alles selecteren
	Merk Wurth Elektronik
	Series STAR-BUENO
	Sub Type Snap Ferrite
	Product Type Ferrite Sleeve
	Application EMI Suppression
	Material 4W620
	Impedance at 25 MHz 122Ω
	Key No
	Openable Yes
	Impedance at 100 MHz 206Ω
	Aperture Diameter 5mm
	Number of Apertures 1
	External Depth 30.3mm
	External Width 19mm
	External Height 19mm
	Standards/Approvals REACH, RoHS

Land van herkomst:: DE

Wurth Elektronik STAR-BUENO Series Ferrite Sleeve, 122Ω Impedance at 25Mhz, 206Ω Impedance at 100MHz - 74275812

This ferrite sleeve is a snap-on, openable ferrite clamp designed to reduce conducted interference on single cables. It is MADE from 4W620 material and is intended for EMI suppression in electronic assemblies where removable noise suppression components are required. The sleeve accepts a single conductor and conforms to REACH and RoHS standards.

Features and Benefits:

• 122Ω impedance at 25MHz provides low-frequency attenuation
• 206Ω impedance at 100MHz delivers high-frequency suppression
• Openable snap design allows quick retrofitting onto installed cables
• Single-aperture construction enables focused suppression of one conductor
• 4W620 material offers magnetic properties suited to EMI filtering

Applications

• Suitable for clamping onto signal cables to lower interference
• Used for noise reduction in sensitive electronic modules
• Ideal for retrofit suppression on pre-wired harnesses
• Can be used for EMI control in test and measurement setups

What aperture size accommodates conductors?

The internal opening measures 5mm, allowing standard single cables to pass through.

What are the external dimensions for installation planning?

The part measures 19mm x 19mm x 30.3mm for spatial allocation on assemblies.

Is the component compatible with environmental regulations?

It meets REACH and RoHS requirements for restricted substances.

How many apertures does it contain and how does that affect use?

It has one aperture, so it is intended for use on a single conductor rather than multi-core bundles.