Wurth Elektronik Openable, Diameter 6 mm Ferrite Sleeve, Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For General Application,

RS-stocknr.:: 814-9986
Artikelnummer Distrelec:: 110-63-498
Fabrikantnummer:: 74271112S
Fabrikant:: Wurth Elektronik

Wurth Elektronik Openable, Diameter 6 mm Ferrite Sleeve, Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For General Application,

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 4,04

(excl. BTW)

€ 4,89

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 58 stuk(s) vanaf 02 november 2026
Plus verzending 795 stuk(s) vanaf 02 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 4,04
10 - 24	€ 3,88
25 - 49	€ 3,68
50 - 99	€ 3,40
100 +	€ 3,04

*prijsindicatie

RS-stocknr.:: 814-9986
Artikelnummer Distrelec:: 110-63-498
Fabrikantnummer:: 74271112S
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Series	WE-STAR TEC
	Sub Type	Snap Ferrite
	Product Type	Ferrite Sleeve
	Application	General Application, Safety Relevant Application
	Material	4W620
	Key	No
	Impedance at 25 MHz	175Ω
	Openable	Yes
	Impedance at 100 MHz	316Ω
	Aperture Diameter	6mm
	Number of Apertures	1
	External Depth	23.7mm
	External Height	18.2mm
	External Width	40.5mm
	Standards/Approvals	REACH, RoHS

	Alles selecteren
	Merk Wurth Elektronik
	Series WE-STAR TEC
	Sub Type Snap Ferrite
	Product Type Ferrite Sleeve
	Application General Application, Safety Relevant Application
	Material 4W620
	Key No
	Impedance at 25 MHz 175Ω
	Openable Yes
	Impedance at 100 MHz 316Ω
	Aperture Diameter 6mm
	Number of Apertures 1
	External Depth 23.7mm
	External Height 18.2mm
	External Width 40.5mm
	Standards/Approvals REACH, RoHS

Wurth Elektronik WE-STAR TEC Series Ferrite Sleeve, 175Ω Impedance at 25Mhz, 316Ω Impedance at 100MHz - 74271112S

This ferrite sleeve is an openable snap ferrite component intended to suppress high-frequency interference in both general and safety-relevant installations. It is manufactured from 4W620 material and designed to accept cables through a single 6mm aperture, allowing straightforward retrofitting and cable management in assemblies where EMI attenuation is required.

Features and Benefits:

• 175Ω impedance at 25MHz provides targeted low-frequency suppression
• 316Ω impedance at 100MHz enhances high-frequency attenuation
• Openable snap design allows Rapid installation on existing cables
• Single 6mm aperture supports typical signal and power conductors
• Complies with RoHS and REACH for material restriction adherence

Applications

• Suitable for attenuation on control signal wiring
• Ideal for use on power leads in safety circuits
• Used for noise reduction in sensor cable runs
• Can be used for retrofitting existing harnesses
• Suitable for general Electronic Assembly noise mitigation

What material is used for its magnetic properties?

It is produced from 4W620 ferrite material which provides the required permeability for EMI suppression.

How does the component mount around cables?

The unit is openable and snaps closed around a conductor using its split-body design for clamp-on installation.

What approvals relate to hazardous substances?

The device meets REACH and RoHS approvals restricting specific hazardous substances.

What external envelope should be allowed for panel layout?

Plan for an external footprint of approximately 40.5mm width by 23.7mm depth and 18.2mm height.