- RS-stocknr.:
- 536-7336
- Fabrikant:
- RS PRO
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
148 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Totale prijs (1 Aantal stuks)
€ 19,03
(excl. BTW)
€ 23,03
(incl. BTW)
Aantal stuks | Per stuk |
1 - 14 | € 19,03 |
15 - 49 | € 18,08 |
50 + | € 17,11 |
- RS-stocknr.:
- 536-7336
- Fabrikant:
- RS PRO
- Land van herkomst:
- GB
RS PRO Standard Fibre Patch Cords - LC to ST
This cost-effective fibre optic multimode cable from our own RS PRO brand offers solution for short distance transmission. It will make the installation and maintenance more efficient due to being more flexible comparing to standard fibre optic cable.
Features
LC to ST fibre patch lead connection
LC connection – A push/pull type fibre connector
ST connection – A metal cylindrical keyed bayonet type fibre connector that is spring loaded and attached using push and twist motion
Core diameter - 62.5/125 μm (core to cladding diameter ratio is 62.5 microns to 125 microns)
Jacket – flame retardant LSZH
Colour coded strain to indicate signal path
10m length
LC connection – A push/pull type fibre connector
ST connection – A metal cylindrical keyed bayonet type fibre connector that is spring loaded and attached using push and twist motion
Core diameter - 62.5/125 μm (core to cladding diameter ratio is 62.5 microns to 125 microns)
Jacket – flame retardant LSZH
Colour coded strain to indicate signal path
10m length
Difference between Singlemode and Multimode fibre
Multimode fibre can carry multiple light rays at the same time and travels short distances comparing to singlemode which has a single light path and can travel much longer distance of up to 100km.
Applications
Multimode fibre optic cable is typically used in data and audio/video applications in LANs (local network area)
Check out different lengths in our range
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Caution
Do not exceed the minimum bend radius.
Kenmerk | Waarde |
---|---|
Length | 1m |
Connector 1 | LC |
Propagation Mode | Multi Mode |
Connector 2 | ST |
Terminated/Unterminated | Terminated |
Core Diameter | 62.5/125µm |
Sheath Colour | Orange |
Cable Construction | Duplex |
Fibre Type | OM1 |
Sheath Material | Low Smoke Zero Halogen (LSZH) |
Attenuation | 0.5 dB |
Standards Met | IEC 61300-3-4 |
- RS-stocknr.:
- 536-7336
- Fabrikant:
- RS PRO
- Land van herkomst:
- GB
RS PRO Standard Fibre Patch Cords - LC to ST
This cost-effective fibre optic multimode cable from our own RS PRO brand offers solution for short distance transmission. It will make the installation and maintenance more efficient due to being more flexible comparing to standard fibre optic cable.
Features
LC to ST fibre patch lead connection
LC connection – A push/pull type fibre connector
ST connection – A metal cylindrical keyed bayonet type fibre connector that is spring loaded and attached using push and twist motion
Core diameter - 62.5/125 μm (core to cladding diameter ratio is 62.5 microns to 125 microns)
Jacket – flame retardant LSZH
Colour coded strain to indicate signal path
10m length
LC connection – A push/pull type fibre connector
ST connection – A metal cylindrical keyed bayonet type fibre connector that is spring loaded and attached using push and twist motion
Core diameter - 62.5/125 μm (core to cladding diameter ratio is 62.5 microns to 125 microns)
Jacket – flame retardant LSZH
Colour coded strain to indicate signal path
10m length
Difference between Singlemode and Multimode fibre
Multimode fibre can carry multiple light rays at the same time and travels short distances comparing to singlemode which has a single light path and can travel much longer distance of up to 100km.
Applications
Multimode fibre optic cable is typically used in data and audio/video applications in LANs (local network area)
Check out different lengths in our range
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Caution
Do not exceed the minimum bend radius.
Kenmerk | Waarde |
---|---|
Length | 1m |
Connector 1 | LC |
Propagation Mode | Multi Mode |
Connector 2 | ST |
Terminated/Unterminated | Terminated |
Core Diameter | 62.5/125µm |
Sheath Colour | Orange |
Cable Construction | Duplex |
Fibre Type | OM1 |
Sheath Material | Low Smoke Zero Halogen (LSZH) |
Attenuation | 0.5 dB |
Standards Met | IEC 61300-3-4 |