Broadcom 1 MBd 660 nm Fibre Optic Receiver, Square, Duplex Connector

RS-stocknr.:: 189-4847
Fabrikantnummer:: HFBR-2522Z
Fabrikant:: Broadcom

Broadcom 1 MBd 660 nm Fibre Optic Receiver, Square, Duplex Connector

Subtotaal (1 tube van 200 eenheden)*

€ 1.866,40

(excl. BTW)

€ 2.258,40

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

200 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 400 stuk(s) vanaf 19 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tube*
200 +	€ 9,332	€ 1.866,40

*prijsindicatie

RS-stocknr.:: 189-4847
Fabrikantnummer:: HFBR-2522Z
Fabrikant:: Broadcom

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Broadcom
	Maximum Data Rate	1MBd
	Product Type	Fibre Optic Receiver
	Connector Shape	Square
	Wavelength of Peak Sensitivity	660nm
	Typical Rise Time	80ns
	Typical Fall Time	40ns
	Number of Pins	6
	Mount Type	Through Hole
	Connector Type	Duplex
	Maximum Data Transmission Distance	55m
	Width	10.16mm
	Height	7.62mm
	Standards/Approvals	RoHS
	Length	18.8mm
	Series	Versatile Link
	Output Signal Type	TTL

	Alles selecteren
	Merk Broadcom
	Maximum Data Rate 1MBd
	Product Type Fibre Optic Receiver
	Connector Shape Square
	Wavelength of Peak Sensitivity 660nm
	Typical Rise Time 80ns
	Typical Fall Time 40ns
	Number of Pins 6
	Mount Type Through Hole
	Connector Type Duplex
	Maximum Data Transmission Distance 55m
	Width 10.16mm
	Height 7.62mm
	Standards/Approvals RoHS
	Length 18.8mm
	Series Versatile Link
	Output Signal Type TTL

HFBR-x5xxZ Versatile Link Fiber Optic Connection Data Sheet

Broadcom Versatile Link Series Fibre Optic Receiver, 55m Maximum Data Transmission Distance, 1MBd Maximum Data Rate - HFBR-2522Z

This fibre-optic receiver converts incoming optical signals into TTL electrical output for short-distance links. It is intended for through-hole PCB mounting in systems requiring a duplex, square-shaped connector Interface and is suitable for installations compliant with RoHS.

Features and Benefits:

• 660 nm Peak sensitivity enables detection of red-wavelength signals
• TTL output facilitates direct logic-level interfacing
• 1 Mbaud maximum data rate suits low-speed communication
• 80 ns rise time and 40 ns fall time provide responsive signal edges
• 6-pin configuration supports Compact circuit integration

Applications

• Suitable for duplex optical interconnects on control boards
• Ideal for short-range sensor data links within 55 m
• Used with industrial through-hole assemblies requiring RoHS
• Can be used for TTL-level signalling in laboratory equipment

What mounting method is required for PCB assembly?

It is designed for through-hole mounting to secure the connector to the board.

How many electrical connections must the PCB accommodate?

The device uses six pins that require corresponding PCB holes and traces.

What connector geometry must mating hardware match?

Mating parts must accept a square duplex connector shape.

What is the maximum reliable transmission distance?

The receiver supports signal reception up to 55 m over suitable fibre.

Which signal characteristics define its temporal response?

Typical switching behaviour is 80 ns for rising edges and 40 ns for falling edges.