Fluke Networks QuickClean-2.5-5P, Fibre Optic Test Equipment Cleaning Kit for 2.5 mm Quick Clean Connectors

  • RS-stocknr. 136-7598
  • Fabrikantnummer QuickClean-2.5-5P
  • Fabrikant Fluke Networks
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: VN
Productomschrijving

Fluke Networks Quick Clean 2.5 mm Cleaner

Fluke Networks Quick Clean 2.5 mm Cleaner is designed to clean SC, ST, FC and E2000 connectors with either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, the Quick Clean Cleaners provide consistent cleaning every time. The operator can easily engage the cleaner using a simple push motion, an audible "click" is heard when the process is completed.

These tools are effective at removing contaminants during fibre optic installation that include: • Road Dust (ISO 12103-1)
• Skin Oil Residue
• Salt Water Residue
• Alcohol Residue
• Vegetable Residue
• Graphite Dryer Lint
• Hand Lotion
• Distilled Water Residue

Features and Benefits

• Moulded with an antistatic material • Simple pushing motion to engage tool
• Audible CLICK to alert the user when tool is fully engaged
• Clean over 525 end faces per unit
• Tip extender to 208 mm for hard to reach connectors
• Crush resistant to over 250 N
• Impact resistant to survive drops over 1.5 m

Fluke Networks Quick Cleaner

The Fluke Networks quick cleaner is designed to clean fibre optic connector end-faces on patch cables, within adapters or patch panels. It contains a single pack of a cleaner of 2.5mm fibre, SC, ST, FC and E2000 connectors with either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, this cleaner provides consistent cleaning every time. This tool is particularly effective at removing contaminants during fibre optic installation that include road dust (ISO 12103-1), skin oil residue, saltwater residue, alcohol residue, vegetable residue, graphite dryer lint hand lotion and distilled water residue.

Features and Benefits

• Simple pushing motion to engage tool • Audible “click” to alert the user when tool is fully engaged • Clean over 600 end faces per unit • Tip extender to 208mm for hard to reach connectors • Crush resistant to over 250N • impact-resistant to survive drops over 1.5m • Cleans male and female MT ferrule • Nozzle is keyed for precise alignment of the cleaning tip to the fibre array • Alignment cap lid opens for cleaning the unmated connectors

Applications

• Data centres • Telecommunication

Certifications

• ANSI/ESD S20.20:2014 • BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Accessory Type 2.5 mm Quick Clean Connector Cleaner
For Use With 2.5 mm Quick Clean Connectors
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Box of 5
318,00
(excl. BTW)
384,78
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
€ 318,00
€ 63,60
*prijsindicatie
Related Products
FI-500CP Camera Probe for use with the FI-500 ...
Description:
FI-500CP Camera Probe for use with the FI-500 FiberInspector Micro. Use in dark patch panels with PortBright illumination built into the probeAutoFocus instead of a traditional manual focus ring that is difficult to hold and adjust.
Visual fault locator cable continuity tester locates fibers, ...
Description:
Visual fault locator cable continuity tester locates fibers, finds faults, verifies continuity and polarity. Locates visual faults including tight bends, breaks and bad connectorsAccelerates end-to-end fiber checksEasily verifies polarity and identifies fibersFeatures continuous and flashing modesErgonomic case ...
Fluke Networks MRC-50-EFC-SCLC Multimode cord for testing LC ...
Description:
Fluke Networks MRC-50-EFC-SCLC Multimode cord for testing LC terminated fibers (SC/LC). Test reference cord used in conjunction with Fluke Networks Encircled Flux multimode compliant sourcesEncircled Flux multimode test reference cordConnector Type: SC/LC50 μm2m Length.
Multimode compliant test reference cord kit (2m) for ...
Description:
Multimode compliant test reference cord kit (2m) for testing 50μm LC terminated fibers (2 SC/LC, 2 LC/LC). Test reference cord used in conjunction with Fluke Networks Encircled Flux multimode compliant sourcesContains: 2 SC/LC EF-TRCs and 2 LC/LC TRCsEncircled Flux multimode ...