SMC 1/4 in G Filter Regulator Lubricator, Automatic Drain, 5 μm Filtration Size

RS-stocknr.:: 395-433
Fabrikantnummer:: AC20A-F02-D
Fabrikant:: SMC

SMC 1/4 in G Filter Regulator Lubricator, Automatic Drain, 5 μm Filtration Size

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 62,09

(excl. BTW)

€ 75,13

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Beperkte voorraad

203 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 62,09

*prijsindicatie

RS-stocknr.:: 395-433
Fabrikantnummer:: AC20A-F02-D
Fabrikant:: SMC

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SMC
	Product Type	Filter Regulator Lubricator
	Port Size	1/4 in G
	Integrated Pressure Gauge	No
	Maximum Flow Rate	2000L/min
	Connection Thread Standard	G
	Drain Type	Automatic
	Series	AC10A
	Filtration Size	5μm
	Minimum Operating Temperature	-5°C
	Maximum Operating Pressure	1 Mpa
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Pressure Setting Range	0.05 to 0.85 MPa
	Bowl Material	Polycarbonate

	Alles selecteren
	Merk SMC
	Product Type Filter Regulator Lubricator
	Port Size 1/4 in G
	Integrated Pressure Gauge No
	Maximum Flow Rate 2000L/min
	Connection Thread Standard G
	Drain Type Automatic
	Series AC10A
	Filtration Size 5μm
	Minimum Operating Temperature -5°C
	Maximum Operating Pressure 1 Mpa
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Pressure Setting Range 0.05 to 0.85 MPa
	Bowl Material Polycarbonate

Land van herkomst:: JP

SMC AC10A Series Filter Regulator Lubricator, 5μm Filtration size, 1/4in G Port size - AC20A-F02-D

This filter regulator lubricator provides combined Air filtration, pressure regulation and lubrication for compressed Air systems used in industrial automation. Designed for inline installation with a G-thread port, it conditions Air to maintain consistent downstream performance while removing particulates and introducing controlled lubrication for pneumatic components.

Features & Benefits

• 5μm filtration removes fine particulates to protect valves and actuators
• 0.05 to 0.85MPa adjustable pressure range for precise control
• Maximum flow rate 2000L/min supports high-throughput systems
• Polycarbonate bowl with 25cm³ oil capacity enables visible reservoir monitoring
• Automatic drain option disposes condensate without manual intervention
• Relieving exhaust mechanism stabilises downstream pressure during venting

Applications

• Suitable for pneumatic actuator supply in assembly lines
• Ideal for machine tool Air preparation and control cabinets
• used with Air-driven valves in electronics manufacturing
• Can be used for general plant compressed Air mains conditioning
• Suitable for servo-pneumatic control circuits in mechanical systems

What ambient and medium temperature limits should I observe?

Operate where Air temperature remains between -5°C and 60°C and avoid conditions that allow freezing.

How does the unit handle excess pressure or safety testing?

The device is rated for a maximum operating pressure of 1.0MPa and a proof pressure of 1.5MPa for pressure withstand checks.

What drain and reservoir capacities are provided for maintenance planning?

The lubricator reservoir holds 25cm³ of oil and the filter drain capacity is 8cm³ to guide service intervals.

How is flow direction determined at installation?

The assembly is intended for left-to-right airflow and should be mounted accordingly to ensure correct function.

What thread and port size should installers prepare for connection?

Use a 1/4 in G threaded port to match the inlet connection standard specified.