Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530222

RS-stocknr.:: 288-2819
Fabrikantnummer:: MSB6-1/2:J1D1A1-WP
Fabrikant:: Festo

Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530222

Subtotaal (1 eenheid)*

€ 387,47

(excl. BTW)

€ 468,84

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 10 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 387,47

*prijsindicatie

RS-stocknr.:: 288-2819
Fabrikantnummer:: MSB6-1/2:J1D1A1-WP
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Port Size	1/2 in
	Product Type	FRL Assembly
	Maximum Flow Rate	3100L/min
	Integrated Pressure Gauge	Yes
	Connection Thread Standard	G
	Drain Type	Manual
	Series	MS
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Pressure	18 bar
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Bowl Material	Polycarbonate
	Model Number	530222

	Alles selecteren
	Merk Festo
	Port Size 1/2 in
	Product Type FRL Assembly
	Maximum Flow Rate 3100L/min
	Integrated Pressure Gauge Yes
	Connection Thread Standard G
	Drain Type Manual
	Series MS
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Pressure 18 bar
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Bowl Material Polycarbonate
	Model Number 530222

Land van herkomst:: HU

Festo MS FRL Assembly, 1/2 Port Size, 18 Bar Maximum Operating Pressure - MSB6-1/2:J1D1A1-WP, Numeric Part Number:530222

This FRL assembly conditions compressed Air for industrial pneumatic systems by combining filtration, pressure regulation and lubrication into a single unit. It is designed for integration into control and automation equipment where treated Air is required to maintain actuator and valve performance. The assembly accepts G-thread connections and is suited to systems operating across typical workshop temperatures.

Features and Benefits:

• 3100 L/min maximum flow supports high-demand pneumatic circuits
• 18 bar maximum pressure enables robust system headroom
• 40 μm filtration removes fine particulates to protect downstream components
• Polycarbonate bowl permits Visual fluid and condensate inspection
• Integrated pressure gauge gives immediate system pressure feedback
• Manual drain provides simple condensate evacuation without tools

Applications

• Suitable for upstream Air treatment on industrial automation lines
• Ideal for pneumatic supply to valves and cylinders in assembly plants
• Used with high-flow blow-off and actuated tooling systems
• Can be used for compressed Air preparation in test rigs and labs

What temperature range can it withstand in continuous service?

The unit is rated to operate between -10°C and 60°C, permitting use in typical indoor and sheltered industrial environments.

How is the unit connected into existing pneumatic piping?

It uses G-standard threaded ports with a 1/2 in port size for direct screw-in installation to compatible fittings.

What particulate size will the filter capture and how does that affect maintenance?

The filter element captures particles down to 40 μm, reducing wear on valves and actuators and extending service intervals for downstream components.

Does the assembly include Visual indication of pressure without additional instrumentation?

Yes, the built-in pressure gauge provides on-unit pressure readout so operators can verify supply pressure at a glance.