Microchip Split Gate 2 MB SPI Flash Memory 8-Pin SOIC
- RS-stocknr.:
- 264-8829P
- Fabrikantnummer:
- SST25VF020B-80-4I-SAE-T
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 69,30
(excl. BTW)
€ 83,85
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 50 - 90 | € 1,386 |
| 100 + | € 1,372 |
*prijsindicatie
- RS-stocknr.:
- 264-8829P
- Fabrikantnummer:
- SST25VF020B-80-4I-SAE-T
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Memory Size | 2MB | |
| Product Type | Flash Memory | |
| Interface Type | SPI | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Organisation | 256K x 8 | |
| Mount Type | Surface | |
| Maximum Clock Frequency | 80MHz | |
| Cell Type | Split Gate | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 2.3V | |
| Timing Type | Synchronous | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | JEDEC, RoHS | |
| Length | 6mm | |
| Width | 5mm | |
| Supply Current | 10mA | |
| Series | SST25VF | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Memory Size 2MB | ||
Product Type Flash Memory | ||
Interface Type SPI | ||
Package Type SOIC | ||
Pin Count 8 | ||
Organisation 256K x 8 | ||
Mount Type Surface | ||
Maximum Clock Frequency 80MHz | ||
Cell Type Split Gate | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 2.3V | ||
Timing Type Synchronous | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals JEDEC, RoHS | ||
Length 6mm | ||
Width 5mm | ||
Supply Current 10mA | ||
Series SST25VF | ||
Automotive Standard No | ||
The Microchip Serial flash memory features a four-wire, SPI compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. This memory is enhanced with improved operating frequency and even lower power consumption. This SPI serial flash memory is manufactured with SST proprietary, high performance CMOS Super flash technology. The split-gate cell design and thick-oxide tunnelling injector attain better reliability and manufacturability compared with alternate approaches. The SST25VF020B device significantly improve performance and reliability, while lowering power consumption.
Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
Superior Reliability-endurance: 100,000 Cycles (typical)- greater than 100 years data retention
Low power consumption:– active read current: 10 mA (typical)– standby current: 5 μA (typical)
All non-Pb (lead-free) devices are RoHS compliant
-40°C to +85°C industrial temperature range